Have a question? Call us now at +91 9650660070

Leader Industrial Valves

Showing 40 out of 1972 products

Sort by

Leader GM 275 Forged Brass H Double Regulating Balancing Valve With Nozzle 32 mm PN - 16

Ships within 4 days

Leader GM 275 Forged Brass H Double Regulating Balancing Valve With Nozzle 32 mm PN - 16

By Leader

₹5,309

The GM 275 Forged Brass Double Regulating Balancing Valve is a double regulating type with nozzles and is used in the petroleum industry for precise balancing and also as a safety valve or back pressure regulator in gas distribution systems and industrial applications where a double regulating balancing valve is required. The brass body of this product helps to prevent damage or corrosion from occurring during use while its Teflon seals help to prevent leakage or wear over time due to repeated opening/closing operations. The GM 275 is a double regulating balancing valve that confirms to BS 7350 PN-16 and has been designed specifically for use in high pressure water systems. This valve is suitable for use in both domestic and commercial applications and is ideal for pumping stations, power stations, irrigation systems and water treatment plants where high pressure and accurate flow control are essential requirements. It has a working pressure of up to 24 bar (hydraulic) and 17.6 bar (hydrostatic). It also features a nozzle with an internal diameter of 0.4 cm and an external diameter of 0.5 cm for easy installation into existing systems with minimal modification required due to its compact design so it can be easily replaced during routine maintenance periods or when more efficient equipment is required after years of use without having to replace all the piping as well as all other components involved with installing new equipment which could cost thousands of dollars instead of just replacing one piece at a time which would cost much less over time plus save you money while improving efficiency at the same time!

Leader Gun-Metal Horizontal Lift Check Valve 25 mm Isi To Is 778

Ships within 4 days

Leader Gun-Metal Horizontal Lift Check Valve 25 mm Isi To Is 778

By Leader

₹2,359

Key Features:
Isi Screwed In Cover.
Integral Seat.
Screwed Female Threads To Is:554 (Parallel).
Class 1-1.0 Mpa Upto 45° C.

Leader Gun Metal Globe Valve 20 mm 1.5 Mpa (217.5 psig) Isi To Is 778

Ships within 4 days

Leader Gun Metal Globe Valve 20 mm 1.5 Mpa (217.5 psig) Isi To Is 778

By Leader

₹1,651

Key Features:
Isi Screwed In Bonnet.
Rising Stem.
Screwed Female Ends To Is:554 (Parallel).
Class 1-1.0 Mpa Upto 45° C.

Leader Gun Metal Globe Valve 15 mm 1.5 Mpa (217.5 psig) Isi To Is 778

Ships within 3 days

Leader Gun Metal Globe Valve 15 mm 1.5 Mpa (217.5 psig) Isi To Is 778

By Leader

₹1,096

Key Features:
Isi Screwed In Bonnet.
Rising Stem.
Screwed Female Ends To Is:554 (Parallel).
Class 1-1.0 Mpa Upto 45° C.

Related Searches

leader gun metal gate and sluice valves

leader check valves

leader globe valves

leader gate and sluice valves

leader butterfly valve

Leader 2-1/2 Inch,65 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 2-1/2 Inch,65 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹7,079 ~~₹7,537~~

You save ₹458!

6.08% OFF

The GM 048 Gun Metal Vertical Check Valve BS : 5154 PN - 16 B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Resilient Seated, Spring Loaded is a high-quality check valve that's perfect for use in a wide range of industrial and commercial applications. This vertical check valve is designed to be mounted on the inside of a pipeline or vessel wall, with the flow going through it in one direction only. The pressure rating is 24 bar (345 psi). It has a resilient seat made of stainless steel and an anti-rotation design to prevent jamming if you need to reverse the flow direction at any time during operation (for example if your system includes multiple valves). The spring loaded design allows for easy operation as well as corrosion resistance due to its all-metal construction that includes brass fittings and steel nuts/bolts for mounting purposes (no plastic parts). The GM 048 Gun Metal Vertical Check Valve BS: 5154 PN: 16 is a resilient seated vertical check valve that has been designed to work with high pressure applications and low flow requirements. It is made from gun metal, giving it a highly durable finish, while the spring loaded design allows for easy installation and removal of the device without any tools necessary. The valve is manufactured from gun metal and is suitable for use in a wide range of industries including water treatment, heating, gas and oil distribution, chemical processing and power generation. This product has been designed from the ground up to be strong and reliable, so you can be confident that it will work as well as you need it to for years to come.

Leader 8 Inch,200 mm Cast Iron Wafer Type Check Valve CI 038

Ships within 8 days

Leader 8 Inch,200 mm Cast Iron Wafer Type Check Valve CI 038

By Leader

₹8,849 ~~₹9,570~~

You save ₹721!

7.53% OFF

CI 038 Cast Iron Wafer Type Check Valve PN - 16 Wafer Type B.T.P. - 24 Bar Hyd.S.T.P. - 17.6 Bar Hyd. Renewable Resilient Seat Flap Pin : SS This product is made of CI 038 cast iron and has a robust design that ensures durability and long life. The product also has a wide range of applications and can be used in various industries such as heavy machinery, oil & gas, construction, power plants etc. The CI 038 Cast Iron Wafer Type Check Valve is made of cast iron and is a non-return type valve with a flap pin made of stainless steel and a resilient seat made of bronze material, which can be renewed if necessary by an authorized person after installation. The seat and the flap are sealed by O-rings, which are also replaceable by authorized persons after installation for maintenance purposes. The valve has a flanged connection to the piping system and can withstand pressures up to 51 bar static pressure. Cast iron check valve with a renewable resilient seat flap pin for use in applications where resistance to wear, corrosion and erosion are important considerations. The resilient seat ensures long life and easy maintenance as it does not require lubrication or adjustment after installation.

Leader CI 052 Cast Iron Equilibrium Float Valve 100 mm Class - 125

Ships within 8 days

Leader CI 052 Cast Iron Equilibrium Float Valve 100 mm Class - 125

By Leader

₹88,499 ~~₹96,852~~

You save ₹8,353!

8.62% OFF

The CI 052 is suitable for use in steam, hot water or other gases in the chemical industry, power stations and petrochemical plants where there are large variations in temperature and pressure conditions within the process system itself or where there are external changes in these parameters due to seasonal variations in outdoor temperatures or other reasons such as industrial accidents causing fire damage etc., which may otherwise cause physical damage to equipment such as piping systems leading to leakage of hot water through cracks formed during thermal expansion due to sudden cooling down after having been exposed to high temperature levels during operation; also useful where there are high pressures involved. This product is made from copper alloy carbon steel with compressed non asbestos fiber insulation and a body material of cast iron. The CI-052 will help you to control flow in your system by using the lever arm to open or close the valve as needed, which can be done manually or automatically depending on what kind of system you have installed it in and whether or not there are any other sensors present that could signal when things need adjusting through an automated system like this one (such as one built into an existing building's plumbing system).

Leader 8 Inch, 200 mm Cast Iron Wheel Operated Sluice Valve CI 008

Ships within 8 days

Leader 8 Inch, 200 mm Cast Iron Wheel Operated Sluice Valve CI 008

By Leader

₹62,539 ~~₹69,570~~

You save ₹7,031!

10.11% OFF

The CI 008 Cast Iron Sluice Valve IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd. Renewable Seat Cu - alloy Carbon Steel Solid Wedge is a component of the CI 008 Cast Iron J Sluice Valve 50 mm PN-1.0, which is used in the agricultural and industrial sectors to control the flow of water and other liquids through pipes and tubes for irrigation purposes (e.g., sprinklers). The valve has an inside screw bonnet, threaded connection for easy installation and maintenance, and a non-rising stem design that allows it to work with both rising and non-rising stems from 1/4" to 1/2". The CI 008 cast iron sluice valve is manufactured by an ISO 9001:2008 certified company to IS:14846 standard, which is a popular specification for fire fighting equipment and industrial sprinklers in India and abroad. The sluice valve is made of cast iron that ensures superior strength, durability and corrosion resistance even in harsh environments. It has a bolted bonnet inside screw with non-rising stem bonnet design, which makes it easy to handle and install. The CI 008 Cast Iron Sluice Valve is a IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd., Renewable Seat Cu - alloy Carbon Steel Solid Wedge, that is used in the construction of water pipelines in industries like chemical processing, petrochemical plants, oil refineries, etc., where large amounts of water need to be transferred from one place to another with minimal leakage or loss of pressure over long distances and at varying temperatures.

Leader 4 Inch,100 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 4 Inch,100 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹20,059 ~~₹21,966~~

You save ₹1,907!

8.68% OFF

Leader 2 Inch,50 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 2 Inch,50 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹4,011 ~~₹4,065~~

You save ₹54!

1.33% OFF

Leader 6 inch, 150 mm P Ductile Iron Pressure Reducing Valve, DI 050

Ships within 8 days

Leader 6 inch, 150 mm P Ductile Iron Pressure Reducing Valve, DI 050

By Leader

₹1,76,999 ~~₹1,79,372~~

You save ₹2,373!

1.32% OFF

The Leader 6 inch, 150 mm (DI 050) Ductile Iron Pressure Reducing Valve is an indispensable component in fluid control systems, designed to regulate and maintain a consistent downstream pressure, ensuring optimal performance and safety in various industrial applications. Crafted with precision engineering from high-quality ductile iron, this pressure reducing valve exemplifies durability, strength, and corrosion resistance. Its robust construction makes it particularly suitable for applications in water supply systems, irrigation, and industrial processes where precise pressure control is paramount. The ductile iron construction of the Leader Pressure Reducing Valve provides exceptional resilience to challenging environmental conditions, making it a reliable choice for long-term use. The valve's ability to withstand varying pressures and temperatures ensures its adaptability to diverse settings. Equipped with advanced features, such as an adjustable spring-loaded mechanism, the valve allows operators to set and maintain the desired downstream pressure with accuracy. Engineered to meet industry standards, the Leader Ductile Iron Pressure Reducing Valve offers a dependable solution for controlling water flow and pressure in pipelines. Its versatility and ease of integration make it suitable for a wide range of applications, contributing to the overall efficiency and reliability of fluid systems. In summary, the Leader Ductile Iron Pressure Reducing Valve combines durability, precision engineering, and adherence to industry standards to provide a high-performance solution for maintaining optimal pressure levels in fluid systems, ultimately enhancing the safety and efficiency of industrial processes.

Leader 1-1/2 inch, 40 mm I Ductile Iron Pressure Reducing Valve, DI 050

Ships within 8 days

Leader 1-1/2 inch, 40 mm I Ductile Iron Pressure Reducing Valve, DI 050

By Leader

₹28,319 ~~₹30,524~~

You save ₹2,205!

7.22% OFF

The Leader 1-1/2 inch, 40 mm (DI 050) Ductile Iron Pressure Reducing Valve is an indispensable component in fluid control systems, designed to regulate and maintain a consistent downstream pressure, ensuring optimal performance and safety in various industrial applications. Crafted with precision engineering from high-quality ductile iron, this pressure reducing valve exemplifies durability, strength, and corrosion resistance. Its robust construction makes it particularly suitable for applications in water supply systems, irrigation, and industrial processes where precise pressure control is paramount. The ductile iron construction of the Leader Pressure Reducing Valve provides exceptional resilience to challenging environmental conditions, making it a reliable choice for long-term use. The valve's ability to withstand varying pressures and temperatures ensures its adaptability to diverse settings. Equipped with advanced features, such as an adjustable spring-loaded mechanism, the valve allows operators to set and maintain the desired downstream pressure with accuracy. Engineered to meet industry standards, the Leader Ductile Iron Pressure Reducing Valve offers a dependable solution for controlling water flow and pressure in pipelines. Its versatility and ease of integration make it suitable for a wide range of applications, contributing to the overall efficiency and reliability of fluid systems. In summary, the Leader Ductile Iron Pressure Reducing Valve combines durability, precision engineering, and adherence to industry standards to provide a high-performance solution for maintaining optimal pressure levels in fluid systems, ultimately enhancing the safety and efficiency of industrial processes.

Leader 1-1/2 Inch,40 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 1-1/2 Inch,40 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹2,762

Leader 6 Inch, 150 mm Cast Iron Wheel Operated Gate Valve CI 058

Ships within 8 days

Leader 6 Inch, 150 mm Cast Iron Wheel Operated Gate Valve CI 058

By Leader

₹47,199 ~~₹52,012~~

You save ₹4,813!

9.25% OFF

It is an excellent choice for use in a variety of industrial applications, including the oil, gas and petrochemical industries. This valve features a raised stem that allows for easier disassembly and inspection of all parts of the valve, including the bonnet and wedge seat components which are made from carbon steel and are backed up by a renewable seal made from copper alloy material which prevents corrosion due to high temperature applications while also providing durability against wear and tear associated with excessive usage over time! Its rising stem face-to-face distance is 2.4 meters while its rising stem face-to-face distance is 0 meters respectively according to IS: 14846 code specifications (which means it can handle high pressure levels without leaking). The CI 058 Cast Iron Gate Valve Straight Pattern IS:14846 PN 1.6 Bolted Bonnet, O/S & Yoke Type, Rising Stem Face to Face Dist B.T.P. - 2.4 MPa Hyd S.T.P. - 1.6 MPa Hyd is used for medium temperature applications in the oil and gas industry as well as other industries where there are high temperatures involved such as boilers, furnaces and boilers This gate valve has a rising stem design with a face-to-face distance of 2mm which makes it ideal for use with high pressure applications such as oil wells and refineries It also has an adjustable seat and bonnet design which allows you to adjust or repair your gate valve without having to replace it entirely if something goes wrong.

Leader 2 inch, 50 mm J Cast Steel Pressure Reducing Valve, BM 030

Ships within 8 days

Leader 2 inch, 50 mm J Cast Steel Pressure Reducing Valve, BM 030

By Leader

₹46,019 ~~₹51,700~~

You save ₹5,681!

10.99% OFF

The Leader 2 inch, 50 mm (BM 030) Pressure Reducing Valve is an essential component in fluid control systems, designed to maintain a stable and controlled downstream pressure, ensuring the safe and efficient operation of various industrial processes. Crafted with precision engineering and reliability in mind, this valve plays a crucial role in reducing and regulating the incoming fluid pressure to a desired set point. Whether in water supply systems, steam applications, or other fluid-handling processes, the Leader Pressure Reducing Valve excels in providing a consistent and safe pressure environment. Constructed with high-quality materials, such as durable cast steel or other suitable alloys, this pressure reducing valve offers robustness and resilience to withstand the challenges of diverse industrial settings. The valve's design incorporates advanced features, including an adjustable spring-loaded mechanism, allowing operators to fine-tune and set the desired outlet pressure with precision. The Leader Pressure Reducing Valve contributes to the longevity of pipelines, equipment, and other components within a fluid system by preventing excessive pressures that could lead to damage or inefficiencies. Its versatility makes it suitable for applications across various industries, including oil and gas, petrochemical, and water treatment plants. In summary, the Leader Pressure Reducing Valve stands as a reliable and efficient solution for maintaining optimal pressure levels in fluid systems. With its durable construction, precision engineering, and adaptability to diverse industrial environments, this valve exemplifies the Leader brand's commitment to providing high-performance components that contribute to the safety, reliability, and efficiency of industrial processes.

Leader 6 Inch, 150 mm Gun Metal Wheel Operated Gate Valve GM 003

Ships within 8 days

Leader 6 Inch, 150 mm Gun Metal Wheel Operated Gate Valve GM 003

By Leader

₹1,53,399 ~~₹1,63,275~~

You save ₹9,876!

6.05% OFF

It features a gun metal body with an internal threaded bonnet and external screw threading on the stem which provides excellent strength against torque and pressure while also reducing leakage at the seal area. It also features a non-rising stem design with integral seat which makes it easier to install in tight spaces or when space is limited due to other components being installed on top of the valve body. The gate valve has a cast steel body with integral seat made from a solid wedge which allows for easy installation without having to worry about damage occurring during installation or removal. It has an inside thread with a non-rising stem for use with BSP or NPT threads and has a bore size of 20mm, making it suitable for use as a gate valve on small bore pipework and irrigation systems such as pressure boosting pumps or drip irrigation systems which require a higher flow rate than traditional ball valves can offer while still maintaining tight shut offs when required by using smaller diameter piping than would otherwise be necessary using conventional ball valves which tend to have larger pipe sizes due to the need for more material around the ball itself in order to prevent damage if it gets stuck open during normal operation. The GM 003 Gun Metal Gate Valve BS 5154 PN - 20 Screwed in Bonnet, Inside Screw, Non-Rising Stem B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Integral Seat Cu-alloy Solid Wedge is a gate valve that features a gun metal finish, a screwed in bonnet, an inside screw, and non-rising stems. It is manufactured by Gunmetal Gate Valves Limited and has a maximum working pressure of 30 bar with a minimum rising stem pressure of 22 bar at 100% travel.

Leader 1 Inch,25 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 1 Inch,25 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹1,415 ~~₹1,423~~

You save ₹8!

0.56% OFF

Leader 18 Inch, 450 mm Cast Iron Wheel Operated Sluice Valve CI 043

Ships within 8 days

Leader 18 Inch, 450 mm Cast Iron Wheel Operated Sluice Valve CI 043

By Leader

₹3,77,599 ~~₹4,23,946~~

You save ₹46,347!

10.93% OFF

Forged cast iron sluice valve is the most suitable for water works where a high pressure and high flow rate are required. The forged cast iron sluice valve is manufactured by forging process, which makes it strong enough to resist high pressure and high flow rate. The forged cast iron sluice valves are available in 50 mm, 80 mm, 100 mm, 150 mm and 200 mm diameters with different kinds of seats. The seat can be made from composite or stainless steel according to customer's requirement. The forged cast iron sluice valves are also available with different types of seals such as hydrodynamic seat seal, renewable seat seal and solid wedge seat seal etc. The CI 043 cast iron sluice valve is manufactured by us on IS:14846 PN - 1.6 bolted bonnet inside screw non rising stem B.T.P. - 2.4 MPA Hyd. S.T.P - 1.6 MPA Hyd. Renewable Seat Cu-Alloy Seats, Stem SS Solid Wedge with the best quality material and superior finish standards to ensure maximum performance and durability in all weather conditions. This product is suitable for use with water only, but not for use with chemicals or other hazardous substances such as petroleum products or sewage effluent because it will corrode over time if exposed to such substances.

Leader 4 Inch,100 mm Cast Iron Wafer Type Check Valve CI 038

Ships within 8 days

Leader 4 Inch,100 mm Cast Iron Wafer Type Check Valve CI 038

By Leader

₹3,067 ~~₹3,132~~

You save ₹65!

2.08% OFF

Leader CI 026 Cast Iron N Air Release Valve 100 mm PN - 10

Ships within 8 days

Leader CI 026 Cast Iron N Air Release Valve 100 mm PN - 10

By Leader

₹37,759 ~~₹41,086~~

You save ₹3,327!

8.1% OFF

This air release valve has been specifically designed to work with cast iron pipes and valves, so it's a perfect choice if you're looking to upgrade your current system. It's also compatible with EPDM coated wooden balls, which means that it will work well with older systems as well as newer ones. The ball type design ensures that this valve will last for years to come, and the double ball design ensures that it will open easily even when there is pressure behind it. The hydrophobic coating on the wooden balls keeps them from swelling or shrinking in wet or dry conditions, so you'll get a consistent performance out of this product for years to come! It has a large diameter that makes it easy to install and replace, and it has a built-in pressure release mechanism that helps prevent over-pressurization of the system when used with sprinklers or other devices that may cause pressure spikes in the water supply line (such as fire hydrants). The valve has an internal bore of 25 mm, and is designed to be installed vertically or horizontally. The hydrodynamic sealing system uses two stainless steel balls which are coated in EPDM rubber. The valve can also be used with a ballast tank, if desired.

Leader CI 052 Cast Iron Equilibrium Float Valve 50 mm Class - 125

Ships within 8 days

Leader CI 052 Cast Iron Equilibrium Float Valve 50 mm Class - 125

By Leader

₹22,419 ~~₹23,388~~

You save ₹969!

4.14% OFF

Leader 4 Inch, 100 mm Cast Iron Butterfly Valve CI 030

Ships within 8 days

Leader 4 Inch, 100 mm Cast Iron Butterfly Valve CI 030

By Leader

₹10,619 ~~₹11,628~~

You save ₹1,009!

8.68% OFF

It is manufactured using the best quality raw materials which are available in the market and it has passed through various quality checks during manufacturing process so you can rely on its quality and performance as well as durability for many years to come. It has an unbeatable price tag which makes it affordable for everyone who wants to get one for themselves or their home or office building so they can use it whenever they need it most especially when there is a problem with water leakage from pipes or any other plumbing related problems caused by some kind of accident or natural calamity such as earthquake or flood etc.. It is suitable for use in the food industry, water treatment plants and other applications where high performance and reliability are essential, such as chemical processing, power generation and heavy industrial applications. The valve also comes with two different types of seats: one that can be used for low pressure applications and another that can be used for high pressure applications (up to 24 bar). This allows users to choose whether they want more durability or more flexibility from their valves depending on what kind of application they are using them for at any given time!

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 004

Ships within 8 days

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 004

By Leader

₹5,191 ~~₹5,422~~

You save ₹231!

4.26% OFF

Leader IS 004 Gun Metal F Gate Valve 20 mm Class - 1 The valve has an inside screw, which means that it is screwed into place rather than welded. It also has a non rising stem integral seat, which means that the seat does not have to be turned when installing the valve. This type of seat requires more work during installation, but it also provides better sealing. The valve has an integral seat solid wedge cu - alloy, which is made from copper alloy and provides better sealing than other materials. The Gate Valve meaning that it can be used in piping systems carrying water or other liquids. It is rated at 1.5 MPa (hydraulic) and 1 MPa (strictly hydrodynamic). This allows it to handle high pressures without risking damage to itself or the piping system in which it's installed. It is a gate valve that features a 0.1 MPa hyd. Integral Seat Solid Wedge Cu - alloy and a 1.0 MPa hyd. S.T.P., as well as a screwed in bonnet, inside screw and false piece. The gate valve is used for water supply and wastewater drainage, as well as fire protection systems. The gate valve is used for water supply and wastewater drainage, as well as fire protection systems.

Leader 1 Inch,25 mm Gun Metal Horizontal Lift Check Valve IS 021

Ships within 8 days

Leader 1 Inch,25 mm Gun Metal Horizontal Lift Check Valve IS 021

By Leader

₹2,049

The IS 021 is a gun metal horizontal lift check valve designed for use in piping systems where the flow must be stopped when the system pressure reaches a predetermined value (the actuation pressure). The valve is manufactured from gun metal and has a screwed-in cover, which provides protection against damage to the sealing face by foreign objects entering the system or accidental contact with hot surfaces during maintenance work on other parts of the system The IS 021 is suitable for use in systems in which there are high pressures or temperatures, such as those found in chemical or petrochemical plants, boiler houses, power stations, etc., but is also suitable for use in general industrial applications requiring automatic shutoff of liquids and gases at predetermined pressures (actuation pressures). This Horizontal Lift Check Valve is manufactured from gun metal and a single piece of solid steel mandrel with integral seats and pressure valves for the cleanest, most reliable seal possible. The body is manufactured from gun metal, with integral seat, spring loaded poppet valves and pre-set at the factory to ensure a leak free seal when installed correctly with no further adjustment required (unless damaged). The IS 021 is a gun metal Horizontal Lift Check Valve that is used to prevent backflow of water or steam into a system when it is not in operation, or under pressure. It has a screwed in cover with a BSP male thread on one end and an integral seat cu-alloy on the other end to provide a seal against pressure. The valve has been designed for use at temperatures ranging from -20°C to +100°C with pressure ratings between 1 and 2 MPa

Leader GM 210 Forged Brass D Air Release Valve 15 mm PN - 16

Ships within 8 days

Leader GM 210 Forged Brass D Air Release Valve 15 mm PN - 16

By Leader

₹754 ~~₹782~~

You save ₹28!

3.58% OFF

The GM 210 Forged Brass Air Release Valve is a durable and reliable product designed to help you get the most out of your air compressor. This valve has been designed to work with a wide range of applications and it can be used in a variety of situations such as industrial applications or construction sites. It is also suitable for use in domestic settings as well as commercial environments where there are high levels of activity on a daily basis. The valve itself has been made from high quality materials including forged brass which means it will last longer than other types of valves available on the market today plus it comes with an array of features that make it stand out from its competitors too! GM 210 Forged Brass Air Release Valve is a high quality air release valve that is used in a wide variety of applications. The forged brass body ensures durability and long life, while the stainless steel spring provides reliable operation with minimal wear. The PP float disc and rubber O-ring provide reliable sealing and sealing capabilities. The valve features a forged brass construction, which makes it durable and resistant to corrosion. The valve has a 24 bar Hyd. Float with PP, Spring - SS304 rubber o-ring and rubber disc, float - PP. This air release valve is designed to be used with 24 bar hydropneumatic systems and has a B.T.P. (bargaining temperature pressure) of 24 bar. The unit comes with a PP spring and an SS304 rubber O-ring, which will help ensure that it performs optimally in your system.

Leader 3/4 Inch, 20 mm Forged Brass Pressure Reducing Valve FLB 123

Ships within 8 days

Leader 3/4 Inch, 20 mm Forged Brass Pressure Reducing Valve FLB 123

By Leader

₹2,359 ~~₹2,483~~

You save ₹124!

4.99% OFF

This is a spring loaded piston type B.T.P. pressure reducing valve, which has a forged brass body and a spring loaded piston type of operation. It is used for reducing the pressure of liquids and gases with a maximum inlet pressure of 27 kg/cm2 (37,500 psi) and an outlet pressure ranging from 0.5 to 6 kg/cm2 (0 to 100 psi). The valve has two seat options: integral seat or non-integral seat with resilient disc as the sealing member. The FLB 123 Forged Brass Pressure Reducing Valve Spring Loaded Piston Type B.T.P. - 37.5 Kg/CM2 Hyd. is a pressure reducing valve designed to be used in hydraulic systems. It has a maximum inlet pressure of 27 Kg/CM2 Hyd and an outlet pressure of 0.5 to 6 Kg/Cm2 Integral Seat Resilient Disc. The FLB 123 Forged Brass Pressure Reducing Valve Spring Loaded Piston Type B.T.P. - 37.5 Kg/CM2 Hyd. is a pressure reducing valve that can be used in a variety of applications, including residential and commercial water systems, as well as industrial applications. This valve features an integral seat resilient disc that allows for smooth operation, even under heavy pressure conditions. The metal components are made from forged brass, which makes them strong enough to withstand the rigors of daily use without wearing out or breaking down over time. It is used in conjunction with an open-center air compressor, which reduces the pressure of air entering the system to less than one atmosphere. This prevents overloading and damage to the equipment or machinery being run by the compressed air.

Leader 12.7 mm (1/2 Inch),15 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 12.7 mm (1/2 Inch),15 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹683 ~~₹697~~

You save ₹14!

2.01% OFF

Leader GM 066 Gun Metal D Ball Float Valve 15 mm PN - 10

Ships within 8 days

Leader GM 066 Gun Metal D Ball Float Valve 15 mm PN - 10

By Leader

₹1,887 ~~₹1,932~~

You save ₹45!

2.33% OFF

The GM 066 Gun Metal Ball Float Valve PN - 10 Rough Body with Plastic Ball B.T.P. - 15 Bar Hyd. S.T.P. - 11 Bar Hyd., manufactured by Leader, is a ball float valve that has been designed to work with a variety of liquids and gases. The body of this device is constructed from gun metal and has a rough finish, while the ball is made of plastic. This product can be used in applications involving compressed air, water, oils, and even acids under pressure up to 15 bar. It is made from gun metal and has a plastic ball inside the body of the valve that moves up and down to control flow, like a faucet. The ball is what controls how much water comes out, so when you turn on the water, it can fill up your bathtub or wash machine until it reaches a certain level and then shuts off automatically. It has a high-quality, durable ball valve with a metal body that can be used in a variety of applications, including industrial piping systems and other water-based systems. This valve is made from gunmetal, which is an alloy of copper and tin, and has a rough finish for improved wear resistance and corrosion resistance. This valve features a plastic ball that helps to prevent corrosion from occurring on the threads at the top of the valve's housing; this helps ensure that your equipment lasts longer than it would if you were using another material instead (such as brass or stainless steel).

Leader 2-1/2 Inch, 65 mm Cast Iron Wheel Operated Gate Valve CI 004

Ships within 8 days

Leader 2-1/2 Inch, 65 mm Cast Iron Wheel Operated Gate Valve CI 004

By Leader

₹8,849 ~~₹9,404~~

You save ₹555!

5.9% OFF

It is a high quality valve made from carbon steel solid wedge, which makes it resistant to corrosion and abrasion after long term use in harsh conditions. This product has been designed with a low profile design to reduce the amount of space it takes up when installed, making it ideal for use in small spaces like bathrooms or kitchens where space can be limited. This valve comes with an adjustable bonnet which allows you to adjust the opening size according to your needs so that you can control how much water flows through your system at any given time depending on what kind of work you are doing at home (such as washing dishes or taking a shower). CI 004 Cast Iron All Iron Gate Valve Class-125 Bolted Bonnet, Inside Screw, Non-Rising Stem B.T.P. -20.7 Bar Hyd. S.T.P. - 15.18 Bar Hyd is a part of our CI series of cast iron valves that can be used for process applications in a wide variety of settings where corrosion resistance and durability are important factors in the choice of materials used for their construction and assembly processes used during their manufacturing process which includes the following types: ball valves, butterfly valves, gate valves or globe valves depending on your requirements at an affordable price without sacrificing quality at all costs possible due to our strict quality control measures taken into account during each stage of production from raw material selection through final packaging before shipping it out to any customer worldwide interested in purchasing these products from us directly online as well

Leader 2 Inch, 50 mm Cast Iron Reflux Valve CI 021

Ships within 8 days

Leader 2 Inch, 50 mm Cast Iron Reflux Valve CI 021

By Leader

₹7,551 ~~₹8,260~~

You save ₹709!

8.58% OFF

This is a CI 021 Cast Iron Reflux Valve IS: 5312 PN - 1.6 Bolted Cover B.T.P. - 2.4 MPa Hyd.S.T.P. - 1.6 MPa Hyd that is made from the best quality raw materials and is manufactured by our experts based on the international standards and industry norms using latest technology and sophisticated machinery with complete adherence to all safety measures and guidelines laid down by the government or industry bodies so that it can be used in various industries like oil refineries, petrochemicals, chemical plants etc without any problem because of its excellent quality in terms of strength, durability etc and also ensures long lasting performance without any maintenance cost so as to provide excellent value for money to our esteemed customers in various industries across the globe. This product has been tested and meets the standards outlined in IS:5312, which are accepted throughout the International community as an industry benchmark for quality assurance and consistency of product performance. This product is made with durable cast iron, which makes it durable enough to withstand high temperatures and pressures, while also being lightweight enough for easier installation and maintenance by operators or technicians who work on the system regularly or only occasionally need access to the valve itself (depending on how often you intend on using your unit).

Leader CI 052 Cast Iron Equilibrium Float Valve 150 mm Class - 125

Ships within 8 days

Leader CI 052 Cast Iron Equilibrium Float Valve 150 mm Class - 125

By Leader

₹1,15,639 ~~₹1,25,540~~

You save ₹9,901!

7.89% OFF

Leader 12.7 mm (1/2 Inch), 15 mm Cast Carbon Steel Ball Valve CF8016A

Ships within 8 days

Leader 12.7 mm (1/2 Inch), 15 mm Cast Carbon Steel Ball Valve CF8016A

By Leader

₹5,073 ~~₹5,118~~

You save ₹45!

0.88% OFF

The Leader Cast Carbon Steel Ball Valve is a two piece design ball valve that is designed for harsh environment applications. It meets BS EN ISO 17292/API 6D Class 150 standards. It has two port types including B.T.P., S.T.P., as well as air only porting options in accordance with these standards. Made from CF8 steel with SSCR surface treatment and nickel zinc plating, this valve has a stem made from ASTM A276 410 stainless steel. The cast carbon steel body forms an integral part of the stem allowing it to be replaced without dismantling the entire assembly if required. It features renewable RPTFE seals which have excellent reliability and durability in hostile environments unlike metal alloy or plastic seal materials. It handles liquids, gases and steam in process industries including petrochemicals, pharmaceuticals and sugar. The carbon steel device offers mechanical properties at a higher level than cast iron or stainless steel and can be used for handling corrosive fluids at higher temperatures and pressures. This valve also features either stainless steel or carbon steel bolting. Constructed from cast carbon steel, the ball valve can be used for service water and air applications. The highly reliable control provided by the double seal design will ensure that contamination does not enter your system.

Leader 2 Inch, 50 mm Cast Steel Butterfly Valve CCS 015

Ships within 8 days

Leader 2 Inch, 50 mm Cast Steel Butterfly Valve CCS 015

By Leader

₹6,371 ~~₹6,854~~

You save ₹483!

7.05% OFF

Butterfly valves are designed to regulate the flow of gases, liquids, or slurries. The valve is often used in many applications such as plumbing for domestic water supply, air conditioning and refrigeration, chemical processing, power plants, and other industrial facilities. When the butterfly valve is in the fully open position, it allows fluid to flow freely in either direction; however when the butterfly valve is partially closed, it stops fluid flow in one direction but still allows fluid to flow through it in the reverse direction. The butterfly valve's main body has two elongated holes--the upper hole (called a guide) and the lower hole (called a seat). The hole at the top of the body is mounted on a shaft which can turn freely within the body. This shaft is connected to another shaft that sticks out of the body in an opposite direction from where it was mounted. This second shaft has a handle or lever attached to it for opening and closing the valve by hand. The butterfly valve requires very little operating clearance. The smooth rotation of each handwheel makes it easy to adjust the flow of water or gas in any situation. This product is perfect for industrial settings like refineries, petrochemical plants, pulp and paper mills, and food processing plants—and is also great for home use in many plumbing applications like shower heads and faucets.

Leader 2 Inch, 50 mm Stainless Steel 304 Ball Valve CSS 027

Ships within 8 days

Leader 2 Inch, 50 mm Stainless Steel 304 Ball Valve CSS 027

By Leader

₹30,679 ~~₹31,942~~

You save ₹1,263!

3.95% OFF

In a competent tone: A ball valve is a type of valve that uses a sphere to control a hole in the pipe. It is one of the most general types of valve, and it also has a wide range of sizes. Ball valves are used to control fluid flow in systems that require shut offs, but they can also be used as on-off valves. The most basic way to classify ball valves is by their orientation; there are vertical, horizontal, and inline valves. These terms are important because each type has its own unique set of requirements for mounting and orientation. Vertical ball valves have an inlet at the bottom and outlet at the top, while horizontal ones have an inlet on one side and outlet on the other. Inline ones have both outlets on the same end, but can also be installed vertically or horizontally if necessary. Technically speaking, all ball valves operate using either a threaded connection or a flanged connection. This means that they all connect to pipes using either nuts or flanges that thread onto ends of pipes or tubing. Flanges are usually used when the pipes being connected are made out of metal, while threaded connections are usually used when pipes are plastic or PVC piping.

Leader 3/4 inch, 20 mm F Bronze Fusible Plug, BM 082

Ships within 8 days

Leader 3/4 inch, 20 mm F Bronze Fusible Plug, BM 082

By Leader

₹3,468

The Leader 3/4 inch, 20 mm (BM 082) Fusible Plug is a critical safety component designed to protect boilers from catastrophic failures due to overheating. Crafted with precision engineering and durability in mind, this fusible plug serves as a reliable last line of defense in steam boiler systems. Typically made from high-quality materials such as brass or bronze, the fusible plug is strategically placed in the boiler's crown sheet. The primary function of the fusible plug is to melt and release its fusible alloy core when the temperature in the boiler exceeds a safe limit, preventing a potential explosion. The fusible alloy used in the Leader Fusible Plug has a lower melting point than the critical temperature for boiler safety, allowing it to act as an early warning system. As the temperature rises, the fusible alloy melts, creating an opening that releases steam and alerts operators to the dangerous conditions. This rapid release of steam helps to cool the boiler and mitigate the risk of a catastrophic failure. Engineered to meet industry standards, the Leader Fusible Plug is a crucial safety feature in steam boiler applications, providing peace of mind to operators and preventing the dangerous consequences of boiler overheating. Its robust construction and adherence to safety regulations underscore the Leader brand's commitment to manufacturing high-quality components that contribute to the overall safety and reliability of industrial processes.

Leader 3 inch, 80 mm Ductile Iron Suice Valve, DI 043

Ships within 8 days

Leader 3 inch, 80 mm Ductile Iron Suice Valve, DI 043

By Leader

₹18,879 ~~₹19,126~~

You save ₹247!

1.29% OFF

The Leader 3 inch, 80 mm (DI 043) Ductile Iron Sluice Valve stands as a robust and essential component in fluid control systems, engineered with precision and durability for a wide range of industrial applications. Crafted from high-quality ductile iron, this sluice valve is designed to regulate and control the flow of fluids with efficiency and reliability. Its construction from ductile iron not only imparts exceptional strength but also enhances corrosion resistance, making it well-suited for demanding environments in water supply systems, wastewater treatment plants, and industrial pipelines. The design of the Leader Ductile Iron Sluice Valve incorporates advanced features to provide precise control over the fluid flow. The sturdy construction of the valve ensures longevity, and its resistance to corrosion contributes to its ability to withstand the rigors of diverse industrial settings. The valve's rising stem design allows for easy visual indication of the valve position, facilitating monitoring and maintenance. Equipped with a resilient wedge and robust sealing components, the sluice valve is engineered to deliver leak-free performance, ensuring the integrity of the fluid system. Whether used for isolation or throttling, the Leader Ductile Iron Sluice Valve offers reliable and efficient fluid control, contributing to the overall safety and efficiency of water and industrial systems. In summary, the Leader Ductile Iron Sluice Valve exemplifies durability, precision engineering, and adaptability, making it a trusted solution for fluid control in various industrial applications. Its robust construction, corrosion resistance, and advanced features underline the Leader brand's commitment to providing high-performance valves that contribute to the reliability and efficiency of fluid systems.

Leader 4 inch, 100 mm Ductile Iron Gate Valve, DI 058

Ships within 8 days

Leader 4 inch, 100 mm Ductile Iron Gate Valve, DI 058

By Leader

₹27,139 ~~₹27,864~~

You save ₹725!

2.6% OFF

The Leader 4 inch, 100 mm (DI 058) Ductile Iron Gate Valve is a stalwart in fluid control systems, meticulously engineered to provide reliable and precise shut-off in various industrial applications. Crafted with precision from high-quality ductile iron, this gate valve combines exceptional strength with corrosion resistance. The ductile iron construction ensures the valve's durability and resilience, making it well-suited for applications in water distribution systems, wastewater treatment plants, and various industrial processes. The design of the Leader Ductile Iron Gate Valve features a sliding gate or wedge that can be lowered or raised to control the flow of fluids. This mechanism ensures a tight seal when closed, preventing leakage and offering efficient shut-off capabilities. The ductile iron material enhances the valve's ability to withstand harsh environmental conditions, making it a reliable choice for challenging industrial settings. Engineered to meet industry standards, the Leader Gate Valve offers a dependable solution for isolating and controlling the flow of fluids. Its adaptability allows for integration into diverse fluid systems, contributing to the overall efficiency and reliability of industrial processes. The valve's sturdy construction, ease of operation, and low maintenance requirements make it a practical and cost-effective choice for applications where precise fluid control is essential. In summary, the Leader Ductile Iron Gate Valve exemplifies durability, precision engineering, and adaptability, making it an indispensable component for efficient and reliable fluid shut-off in a wide range of industrial applications. This valve underscores the Leader brand's commitment to providing high-quality solutions that contribute to the safety, efficiency, and reliability of fluid systems.

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 003

Ships within 8 days

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 003

By Leader

₹3,067 ~~₹3,341~~

You save ₹274!

8.2% OFF

Leader IS 003 Gun Metal F Gate Valve 20 mm Class - 1 is a quality product that is offered at a competitive price. It has all the features that you need to have in a gate valve and more! This product is made of high-quality material and will last for many years to come. This product comes with an integral seat that is solid wedge cupronickel (Cu-alloy). The rising stem bonnet screwing with pipe threads and cast iron swivel nuts are provided in this product as well. The bonnet is made out of cast iron and has Yoke type connection with the bonnet nut provided on it as well for easy installation purposes for any user or installer who uses this product regularly throughout their day-to-day lives when working on different types of projects such as construction sites or any other type of work environment where they need something like this installed so that they can use it easily without having any problems whatsoever when installing it. This class-1 gate valve is made from gun metal and has a rising stem. It is designed for use with oil and water, and can be used in temperatures ranging from -20 to 250 degrees Celsius. The valve is 15 mm wide, and it has an integral seat that is made of solid copper-alloy. This valve comes with an O/S & Yoke type bonnet, which means that it has a screw-on bonnet with a socket and yoke connection.

Leader 1 Inch, 25 mm Gun Metal Wheel Operated Gate Valve IS 002

Ships within 8 days

Leader 1 Inch, 25 mm Gun Metal Wheel Operated Gate Valve IS 002

By Leader

₹3,303 ~~₹3,572~~

You save ₹269!

7.53% OFF

Leader IS 002 Gun Metal G Gate Valve 25 mm Class - 1 is a high-quality, reliable product that will help you get the job done. This product has been tested and approved by our team of experts, who have found that it is very efficient at its job. It has a unique design that will be sure to impress everyone who uses it. It is made using only top-quality materials, so you know that it will last for years to come without breaking down or falling apart. This product will give you all of the benefits you need to complete your task quickly and efficiently. It is designed for professionals who want a product that will last for years without breaking down or falling apart. This product was built with high-quality materials that make it durable enough to withstand even the most rigorous use over time without succumbing to wear or tear like other products might do when used regularly by professionals who need them every day for their jobs. This product can be used to protect the environment, as it is an environmentally friendly product. It is easy to install and maintain. This product comes in gun metal and features an integral seat solid wedge cu-alloy construction that helps to protect your system from corrosion and wear over time. This is a great option for any system!

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 001

Ships within 8 days

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 001

By Leader

₹1,869

Leader IS 001 Gun Metal F Gate Valve 20 mm Class - 1 is made from gun metal and has an integral seat in the solid wedge design which means it can be used in both high pressure and low pressure systems. The valve has an inside screw which means that it can be used on a wide range of different pipe sizes and is suitable for use with both hot and cold water systems as well as refrigeration systems and other gases such as air or steam which require temperature control via pressure control valves in order to prevent damage to pipes or other equipment when temperatures become too high or too low inside them due to changes in external conditions like weather conditions outside where they're located (such as wind chill factor while camping outdoors during winter months). The IS 001 Gun Metal Gate Valve is a Class - 1 screw in bonnet, inside screw, non-rising stem B.T.P. - 1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd. Integral Seat Solid Wedge Cu - alloy valve made by IS:778 International Standards Organization standards for products that are designed to be used in industrial applications with low pressure (under 7 bar) and medium pressure (up to 10 bar). It has a working pressure range of 0 psi (0 bar) to 1450 psi (100 bar), with a flow rate of 11 liters per minute at 10 psi, which makes it suitable for use in many different industries including pharmaceuticals, food processing, and oil & gas production.

Page 1 of 50 results