Have a question? Call us now at +91 9650660070

Leader Products Online

Showing 40 out of 2323 products

Sort by

Leader GM 275 Forged Brass H Double Regulating Balancing Valve With Nozzle 32 mm PN - 16

Ships within 4 days

Leader GM 275 Forged Brass H Double Regulating Balancing Valve With Nozzle 32 mm PN - 16

By Leader

₹5,309

The GM 275 Forged Brass Double Regulating Balancing Valve is a double regulating type with nozzles and is used in the petroleum industry for precise balancing and also as a safety valve or back pressure regulator in gas distribution systems and industrial applications where a double regulating balancing valve is required. The brass body of this product helps to prevent damage or corrosion from occurring during use while its Teflon seals help to prevent leakage or wear over time due to repeated opening/closing operations. The GM 275 is a double regulating balancing valve that confirms to BS 7350 PN-16 and has been designed specifically for use in high pressure water systems. This valve is suitable for use in both domestic and commercial applications and is ideal for pumping stations, power stations, irrigation systems and water treatment plants where high pressure and accurate flow control are essential requirements. It has a working pressure of up to 24 bar (hydraulic) and 17.6 bar (hydrostatic). It also features a nozzle with an internal diameter of 0.4 cm and an external diameter of 0.5 cm for easy installation into existing systems with minimal modification required due to its compact design so it can be easily replaced during routine maintenance periods or when more efficient equipment is required after years of use without having to replace all the piping as well as all other components involved with installing new equipment which could cost thousands of dollars instead of just replacing one piece at a time which would cost much less over time plus save you money while improving efficiency at the same time!

Leader Gun-Metal Horizontal Lift Check Valve 25 mm Isi To Is 778

Ships within 4 days

Leader Gun-Metal Horizontal Lift Check Valve 25 mm Isi To Is 778

By Leader

₹2,359

Key Features:
Isi Screwed In Cover.
Integral Seat.
Screwed Female Threads To Is:554 (Parallel).
Class 1-1.0 Mpa Upto 45° C.

Leader Gun Metal Globe Valve 20 mm 1.5 Mpa (217.5 psig) Isi To Is 778

Ships within 4 days

Leader Gun Metal Globe Valve 20 mm 1.5 Mpa (217.5 psig) Isi To Is 778

By Leader

₹1,651

Key Features:
Isi Screwed In Bonnet.
Rising Stem.
Screwed Female Ends To Is:554 (Parallel).
Class 1-1.0 Mpa Upto 45° C.

Leader Gun Metal Globe Valve 15 mm 1.5 Mpa (217.5 psig) Isi To Is 778

Ships within 3 days

Leader Gun Metal Globe Valve 15 mm 1.5 Mpa (217.5 psig) Isi To Is 778

By Leader

₹1,096

Key Features:
Isi Screwed In Bonnet.
Rising Stem.
Screwed Female Ends To Is:554 (Parallel).
Class 1-1.0 Mpa Upto 45° C.

Related Searches

leader check valves

leader globe valves

leader gate and sluice valves

leader metal pipe fittings

leader butterfly valve

Leader 2-1/2 Inch,65 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 2-1/2 Inch,65 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹7,079 ~~₹7,537~~

You save ₹458!

6.08% OFF

The GM 048 Gun Metal Vertical Check Valve BS : 5154 PN - 16 B.T.P. - 24 Bar Hyd. S.T.P. - 17.6 Bar Hyd. Resilient Seated, Spring Loaded is a high-quality check valve that's perfect for use in a wide range of industrial and commercial applications. This vertical check valve is designed to be mounted on the inside of a pipeline or vessel wall, with the flow going through it in one direction only. The pressure rating is 24 bar (345 psi). It has a resilient seat made of stainless steel and an anti-rotation design to prevent jamming if you need to reverse the flow direction at any time during operation (for example if your system includes multiple valves). The spring loaded design allows for easy operation as well as corrosion resistance due to its all-metal construction that includes brass fittings and steel nuts/bolts for mounting purposes (no plastic parts). The GM 048 Gun Metal Vertical Check Valve BS: 5154 PN: 16 is a resilient seated vertical check valve that has been designed to work with high pressure applications and low flow requirements. It is made from gun metal, giving it a highly durable finish, while the spring loaded design allows for easy installation and removal of the device without any tools necessary. The valve is manufactured from gun metal and is suitable for use in a wide range of industries including water treatment, heating, gas and oil distribution, chemical processing and power generation. This product has been designed from the ground up to be strong and reliable, so you can be confident that it will work as well as you need it to for years to come.

Leader GM 059 Brass G Bib Cock 25 mm PN - 10

Ships within 8 days

Leader GM 059 Brass G Bib Cock 25 mm PN - 10

By Leader

₹1,829

Bib cocks are used to control flow of water, gas, or steam from one pipe to another. They are also used for non-pressure services such as domestic hot and cold water supply systems and for drainage purposes such as sinks and toilets. This brass bibcock is made of brass and has a polished body with a gasket face seal, an adjustable washerless bonnet nut, a steel spindle and is compatible with 16 bar hydraulic system pressure only. The GM 059 Brass Bib Cock PN - 10 Crutch Head Polished Body B.T.P. - 16 Bar Hyd.S.T.P. - 11 Bar Hyd. is a high-quality, reliable brass bib cock that can be used in both commercial and residential settings. It features a polished body with a 16-bar hydrant shutoff valve and 11-bar hydrant shutoff valve for superior water flow control. This product is manufactured by Leader Brass and comes with a lifetime warranty against manufacturer defects. The Leader Brass D Bib Cock is designed to replace the existing brass valve in your washbasin. This is a product of high quality, and it comes with a polished body, brass body tube and crutch head. It also has a B.T.P. of 16 bar and an S.T.P. of 11 bar, allowing you to use it in different situations without having to worry about whether or not it will be strong enough for your needs. This product is made by GM 059, an industry leader in the production of household goods and accessories, with over 100 years of experience and expertise behind them.

Leader 8 Inch,200 mm Cast Iron Wafer Type Check Valve CI 038

Ships within 8 days

Leader 8 Inch,200 mm Cast Iron Wafer Type Check Valve CI 038

By Leader

₹8,849 ~~₹9,570~~

You save ₹721!

7.53% OFF

CI 038 Cast Iron Wafer Type Check Valve PN - 16 Wafer Type B.T.P. - 24 Bar Hyd.S.T.P. - 17.6 Bar Hyd. Renewable Resilient Seat Flap Pin : SS This product is made of CI 038 cast iron and has a robust design that ensures durability and long life. The product also has a wide range of applications and can be used in various industries such as heavy machinery, oil & gas, construction, power plants etc. The CI 038 Cast Iron Wafer Type Check Valve is made of cast iron and is a non-return type valve with a flap pin made of stainless steel and a resilient seat made of bronze material, which can be renewed if necessary by an authorized person after installation. The seat and the flap are sealed by O-rings, which are also replaceable by authorized persons after installation for maintenance purposes. The valve has a flanged connection to the piping system and can withstand pressures up to 51 bar static pressure. Cast iron check valve with a renewable resilient seat flap pin for use in applications where resistance to wear, corrosion and erosion are important considerations. The resilient seat ensures long life and easy maintenance as it does not require lubrication or adjustment after installation.

Leader CI 052 Cast Iron Equilibrium Float Valve 100 mm Class - 125

Ships within 8 days

Leader CI 052 Cast Iron Equilibrium Float Valve 100 mm Class - 125

By Leader

₹88,499 ~~₹96,852~~

You save ₹8,353!

8.62% OFF

The CI 052 is suitable for use in steam, hot water or other gases in the chemical industry, power stations and petrochemical plants where there are large variations in temperature and pressure conditions within the process system itself or where there are external changes in these parameters due to seasonal variations in outdoor temperatures or other reasons such as industrial accidents causing fire damage etc., which may otherwise cause physical damage to equipment such as piping systems leading to leakage of hot water through cracks formed during thermal expansion due to sudden cooling down after having been exposed to high temperature levels during operation; also useful where there are high pressures involved. This product is made from copper alloy carbon steel with compressed non asbestos fiber insulation and a body material of cast iron. The CI-052 will help you to control flow in your system by using the lever arm to open or close the valve as needed, which can be done manually or automatically depending on what kind of system you have installed it in and whether or not there are any other sensors present that could signal when things need adjusting through an automated system like this one (such as one built into an existing building's plumbing system).

Leader 8 Inch, 200 mm Cast Iron Wheel Operated Sluice Valve CI 008

Ships within 8 days

Leader 8 Inch, 200 mm Cast Iron Wheel Operated Sluice Valve CI 008

By Leader

₹62,539 ~~₹69,570~~

You save ₹7,031!

10.11% OFF

The CI 008 Cast Iron Sluice Valve IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd. Renewable Seat Cu - alloy Carbon Steel Solid Wedge is a component of the CI 008 Cast Iron J Sluice Valve 50 mm PN-1.0, which is used in the agricultural and industrial sectors to control the flow of water and other liquids through pipes and tubes for irrigation purposes (e.g., sprinklers). The valve has an inside screw bonnet, threaded connection for easy installation and maintenance, and a non-rising stem design that allows it to work with both rising and non-rising stems from 1/4" to 1/2". The CI 008 cast iron sluice valve is manufactured by an ISO 9001:2008 certified company to IS:14846 standard, which is a popular specification for fire fighting equipment and industrial sprinklers in India and abroad. The sluice valve is made of cast iron that ensures superior strength, durability and corrosion resistance even in harsh environments. It has a bolted bonnet inside screw with non-rising stem bonnet design, which makes it easy to handle and install. The CI 008 Cast Iron Sluice Valve is a IS:14846 PN-1.0 Bolted Bonnet Inside Screw, Non-Rising Stem B.T.P. -1.5 MPa Hyd. S.T.P. - 1.0 MPa Hyd., Renewable Seat Cu - alloy Carbon Steel Solid Wedge, that is used in the construction of water pipelines in industries like chemical processing, petrochemical plants, oil refineries, etc., where large amounts of water need to be transferred from one place to another with minimal leakage or loss of pressure over long distances and at varying temperatures.

Leader 1 Inch, 25 mm Forged Brass Ball Valve GM 200

Ships within 8 days

Leader 1 Inch, 25 mm Forged Brass Ball Valve GM 200

By Leader

₹1,049 ~~₹1,134~~

You save ₹85!

7.5% OFF

The new Leader GM 200 B Ball Valve 8 mm PN - 25 is a forged brass ball valve that can be used in a variety of applications. It has a maximum working pressure of 16 bar, and it is made up of two halves that are screwed together with the help of a lock nut. The ball valve is designed to withstand high pressures, so it can be used in both industrial and commercial applications. This Class: PN - 25 leader GM 200 B Ball Valve 8 mm is a product of Leader Mechanical Inc., a leading manufacturer of industrial valves for over 20 years. Leader manufactures products that are used daily in industries such as oil, gas, water and wastewater, petrochemical as well as chemical manufacturing. Leader Ball Valve is the perfect product for any application where you need a high flow rate. This is because it has an internal seal that helps to prevent leakage through the valve, meaning that you can use it in more challenging environments without worrying about leaks. The Leader Ball Valve also has a unique design that makes it easier to install, which means that you'll be able to get your project done faster.

Leader 4 Inch,100 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 4 Inch,100 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹20,059 ~~₹21,966~~

You save ₹1,907!

8.68% OFF

Leader 2 Inch,50 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 2 Inch,50 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹4,011 ~~₹4,065~~

You save ₹54!

1.33% OFF

Leader 6 inch, 150 mm P Ductile Iron Pressure Reducing Valve, DI 050

Ships within 8 days

Leader 6 inch, 150 mm P Ductile Iron Pressure Reducing Valve, DI 050

By Leader

₹1,76,999 ~~₹1,79,372~~

You save ₹2,373!

1.32% OFF

The Leader 6 inch, 150 mm (DI 050) Ductile Iron Pressure Reducing Valve is an indispensable component in fluid control systems, designed to regulate and maintain a consistent downstream pressure, ensuring optimal performance and safety in various industrial applications. Crafted with precision engineering from high-quality ductile iron, this pressure reducing valve exemplifies durability, strength, and corrosion resistance. Its robust construction makes it particularly suitable for applications in water supply systems, irrigation, and industrial processes where precise pressure control is paramount. The ductile iron construction of the Leader Pressure Reducing Valve provides exceptional resilience to challenging environmental conditions, making it a reliable choice for long-term use. The valve's ability to withstand varying pressures and temperatures ensures its adaptability to diverse settings. Equipped with advanced features, such as an adjustable spring-loaded mechanism, the valve allows operators to set and maintain the desired downstream pressure with accuracy. Engineered to meet industry standards, the Leader Ductile Iron Pressure Reducing Valve offers a dependable solution for controlling water flow and pressure in pipelines. Its versatility and ease of integration make it suitable for a wide range of applications, contributing to the overall efficiency and reliability of fluid systems. In summary, the Leader Ductile Iron Pressure Reducing Valve combines durability, precision engineering, and adherence to industry standards to provide a high-performance solution for maintaining optimal pressure levels in fluid systems, ultimately enhancing the safety and efficiency of industrial processes.

Leader 1-1/2 inch, 40 mm I Ductile Iron Pressure Reducing Valve, DI 050

Ships within 8 days

Leader 1-1/2 inch, 40 mm I Ductile Iron Pressure Reducing Valve, DI 050

By Leader

₹28,319 ~~₹30,524~~

You save ₹2,205!

7.22% OFF

The Leader 1-1/2 inch, 40 mm (DI 050) Ductile Iron Pressure Reducing Valve is an indispensable component in fluid control systems, designed to regulate and maintain a consistent downstream pressure, ensuring optimal performance and safety in various industrial applications. Crafted with precision engineering from high-quality ductile iron, this pressure reducing valve exemplifies durability, strength, and corrosion resistance. Its robust construction makes it particularly suitable for applications in water supply systems, irrigation, and industrial processes where precise pressure control is paramount. The ductile iron construction of the Leader Pressure Reducing Valve provides exceptional resilience to challenging environmental conditions, making it a reliable choice for long-term use. The valve's ability to withstand varying pressures and temperatures ensures its adaptability to diverse settings. Equipped with advanced features, such as an adjustable spring-loaded mechanism, the valve allows operators to set and maintain the desired downstream pressure with accuracy. Engineered to meet industry standards, the Leader Ductile Iron Pressure Reducing Valve offers a dependable solution for controlling water flow and pressure in pipelines. Its versatility and ease of integration make it suitable for a wide range of applications, contributing to the overall efficiency and reliability of fluid systems. In summary, the Leader Ductile Iron Pressure Reducing Valve combines durability, precision engineering, and adherence to industry standards to provide a high-performance solution for maintaining optimal pressure levels in fluid systems, ultimately enhancing the safety and efficiency of industrial processes.

Leader 1-1/2 Inch,40 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 1-1/2 Inch,40 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹2,762

Leader 6 Inch, 150 mm Cast Iron Wheel Operated Gate Valve CI 058

Ships within 8 days

Leader 6 Inch, 150 mm Cast Iron Wheel Operated Gate Valve CI 058

By Leader

₹47,199 ~~₹52,012~~

You save ₹4,813!

9.25% OFF

It is an excellent choice for use in a variety of industrial applications, including the oil, gas and petrochemical industries. This valve features a raised stem that allows for easier disassembly and inspection of all parts of the valve, including the bonnet and wedge seat components which are made from carbon steel and are backed up by a renewable seal made from copper alloy material which prevents corrosion due to high temperature applications while also providing durability against wear and tear associated with excessive usage over time! Its rising stem face-to-face distance is 2.4 meters while its rising stem face-to-face distance is 0 meters respectively according to IS: 14846 code specifications (which means it can handle high pressure levels without leaking). The CI 058 Cast Iron Gate Valve Straight Pattern IS:14846 PN 1.6 Bolted Bonnet, O/S & Yoke Type, Rising Stem Face to Face Dist B.T.P. - 2.4 MPa Hyd S.T.P. - 1.6 MPa Hyd is used for medium temperature applications in the oil and gas industry as well as other industries where there are high temperatures involved such as boilers, furnaces and boilers This gate valve has a rising stem design with a face-to-face distance of 2mm which makes it ideal for use with high pressure applications such as oil wells and refineries It also has an adjustable seat and bonnet design which allows you to adjust or repair your gate valve without having to replace it entirely if something goes wrong.

Leader 2 inch, 50 mm J Cast Steel Pressure Reducing Valve, BM 030

Ships within 8 days

Leader 2 inch, 50 mm J Cast Steel Pressure Reducing Valve, BM 030

By Leader

₹46,019 ~~₹51,700~~

You save ₹5,681!

10.99% OFF

The Leader 2 inch, 50 mm (BM 030) Pressure Reducing Valve is an essential component in fluid control systems, designed to maintain a stable and controlled downstream pressure, ensuring the safe and efficient operation of various industrial processes. Crafted with precision engineering and reliability in mind, this valve plays a crucial role in reducing and regulating the incoming fluid pressure to a desired set point. Whether in water supply systems, steam applications, or other fluid-handling processes, the Leader Pressure Reducing Valve excels in providing a consistent and safe pressure environment. Constructed with high-quality materials, such as durable cast steel or other suitable alloys, this pressure reducing valve offers robustness and resilience to withstand the challenges of diverse industrial settings. The valve's design incorporates advanced features, including an adjustable spring-loaded mechanism, allowing operators to fine-tune and set the desired outlet pressure with precision. The Leader Pressure Reducing Valve contributes to the longevity of pipelines, equipment, and other components within a fluid system by preventing excessive pressures that could lead to damage or inefficiencies. Its versatility makes it suitable for applications across various industries, including oil and gas, petrochemical, and water treatment plants. In summary, the Leader Pressure Reducing Valve stands as a reliable and efficient solution for maintaining optimal pressure levels in fluid systems. With its durable construction, precision engineering, and adaptability to diverse industrial environments, this valve exemplifies the Leader brand's commitment to providing high-performance components that contribute to the safety, reliability, and efficiency of industrial processes.

Leader 6 Inch, 150 mm Gun Metal Wheel Operated Gate Valve GM 003

Ships within 8 days

Leader 6 Inch, 150 mm Gun Metal Wheel Operated Gate Valve GM 003

By Leader

₹1,53,399 ~~₹1,63,275~~

You save ₹9,876!

6.05% OFF

It features a gun metal body with an internal threaded bonnet and external screw threading on the stem which provides excellent strength against torque and pressure while also reducing leakage at the seal area. It also features a non-rising stem design with integral seat which makes it easier to install in tight spaces or when space is limited due to other components being installed on top of the valve body. The gate valve has a cast steel body with integral seat made from a solid wedge which allows for easy installation without having to worry about damage occurring during installation or removal. It has an inside thread with a non-rising stem for use with BSP or NPT threads and has a bore size of 20mm, making it suitable for use as a gate valve on small bore pipework and irrigation systems such as pressure boosting pumps or drip irrigation systems which require a higher flow rate than traditional ball valves can offer while still maintaining tight shut offs when required by using smaller diameter piping than would otherwise be necessary using conventional ball valves which tend to have larger pipe sizes due to the need for more material around the ball itself in order to prevent damage if it gets stuck open during normal operation. The GM 003 Gun Metal Gate Valve BS 5154 PN - 20 Screwed in Bonnet, Inside Screw, Non-Rising Stem B.T.P. - 30 Bar Hyd. S.T.P. - 22 Bar Hyd. Integral Seat Cu-alloy Solid Wedge is a gate valve that features a gun metal finish, a screwed in bonnet, an inside screw, and non-rising stems. It is manufactured by Gunmetal Gate Valves Limited and has a maximum working pressure of 30 bar with a minimum rising stem pressure of 22 bar at 100% travel.

Leader 1 Inch,25 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 1 Inch,25 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹1,415 ~~₹1,423~~

You save ₹8!

0.56% OFF

Leader 18 Inch, 450 mm Cast Iron Wheel Operated Sluice Valve CI 043

Ships within 8 days

Leader 18 Inch, 450 mm Cast Iron Wheel Operated Sluice Valve CI 043

By Leader

₹3,77,599 ~~₹4,23,946~~

You save ₹46,347!

10.93% OFF

Forged cast iron sluice valve is the most suitable for water works where a high pressure and high flow rate are required. The forged cast iron sluice valve is manufactured by forging process, which makes it strong enough to resist high pressure and high flow rate. The forged cast iron sluice valves are available in 50 mm, 80 mm, 100 mm, 150 mm and 200 mm diameters with different kinds of seats. The seat can be made from composite or stainless steel according to customer's requirement. The forged cast iron sluice valves are also available with different types of seals such as hydrodynamic seat seal, renewable seat seal and solid wedge seat seal etc. The CI 043 cast iron sluice valve is manufactured by us on IS:14846 PN - 1.6 bolted bonnet inside screw non rising stem B.T.P. - 2.4 MPA Hyd. S.T.P - 1.6 MPA Hyd. Renewable Seat Cu-Alloy Seats, Stem SS Solid Wedge with the best quality material and superior finish standards to ensure maximum performance and durability in all weather conditions. This product is suitable for use with water only, but not for use with chemicals or other hazardous substances such as petroleum products or sewage effluent because it will corrode over time if exposed to such substances.

Leader 4 Inch,100 mm Cast Iron Wafer Type Check Valve CI 038

Ships within 8 days

Leader 4 Inch,100 mm Cast Iron Wafer Type Check Valve CI 038

By Leader

₹3,067 ~~₹3,132~~

You save ₹65!

2.08% OFF

Leader CI 026 Cast Iron N Air Release Valve 100 mm PN - 10

Ships within 8 days

Leader CI 026 Cast Iron N Air Release Valve 100 mm PN - 10

By Leader

₹37,759 ~~₹41,086~~

You save ₹3,327!

8.1% OFF

This air release valve has been specifically designed to work with cast iron pipes and valves, so it's a perfect choice if you're looking to upgrade your current system. It's also compatible with EPDM coated wooden balls, which means that it will work well with older systems as well as newer ones. The ball type design ensures that this valve will last for years to come, and the double ball design ensures that it will open easily even when there is pressure behind it. The hydrophobic coating on the wooden balls keeps them from swelling or shrinking in wet or dry conditions, so you'll get a consistent performance out of this product for years to come! It has a large diameter that makes it easy to install and replace, and it has a built-in pressure release mechanism that helps prevent over-pressurization of the system when used with sprinklers or other devices that may cause pressure spikes in the water supply line (such as fire hydrants). The valve has an internal bore of 25 mm, and is designed to be installed vertically or horizontally. The hydrodynamic sealing system uses two stainless steel balls which are coated in EPDM rubber. The valve can also be used with a ballast tank, if desired.

Leader CI 052 Cast Iron Equilibrium Float Valve 50 mm Class - 125

Ships within 8 days

Leader CI 052 Cast Iron Equilibrium Float Valve 50 mm Class - 125

By Leader

₹22,419 ~~₹23,388~~

You save ₹969!

4.14% OFF

Leader 4 Inch, 100 mm Cast Iron Butterfly Valve CI 030

Ships within 8 days

Leader 4 Inch, 100 mm Cast Iron Butterfly Valve CI 030

By Leader

₹10,619 ~~₹11,628~~

You save ₹1,009!

8.68% OFF

It is manufactured using the best quality raw materials which are available in the market and it has passed through various quality checks during manufacturing process so you can rely on its quality and performance as well as durability for many years to come. It has an unbeatable price tag which makes it affordable for everyone who wants to get one for themselves or their home or office building so they can use it whenever they need it most especially when there is a problem with water leakage from pipes or any other plumbing related problems caused by some kind of accident or natural calamity such as earthquake or flood etc.. It is suitable for use in the food industry, water treatment plants and other applications where high performance and reliability are essential, such as chemical processing, power generation and heavy industrial applications. The valve also comes with two different types of seats: one that can be used for low pressure applications and another that can be used for high pressure applications (up to 24 bar). This allows users to choose whether they want more durability or more flexibility from their valves depending on what kind of application they are using them for at any given time!

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 004

Ships within 8 days

Leader 3/4 Inch, 20 mm Gun Metal Wheel Operated Gate Valve IS 004

By Leader

₹5,191 ~~₹5,422~~

You save ₹231!

4.26% OFF

Leader IS 004 Gun Metal F Gate Valve 20 mm Class - 1 The valve has an inside screw, which means that it is screwed into place rather than welded. It also has a non rising stem integral seat, which means that the seat does not have to be turned when installing the valve. This type of seat requires more work during installation, but it also provides better sealing. The valve has an integral seat solid wedge cu - alloy, which is made from copper alloy and provides better sealing than other materials. The Gate Valve meaning that it can be used in piping systems carrying water or other liquids. It is rated at 1.5 MPa (hydraulic) and 1 MPa (strictly hydrodynamic). This allows it to handle high pressures without risking damage to itself or the piping system in which it's installed. It is a gate valve that features a 0.1 MPa hyd. Integral Seat Solid Wedge Cu - alloy and a 1.0 MPa hyd. S.T.P., as well as a screwed in bonnet, inside screw and false piece. The gate valve is used for water supply and wastewater drainage, as well as fire protection systems. The gate valve is used for water supply and wastewater drainage, as well as fire protection systems.

Leader 1 Inch,25 mm Gun Metal Horizontal Lift Check Valve IS 021

Ships within 8 days

Leader 1 Inch,25 mm Gun Metal Horizontal Lift Check Valve IS 021

By Leader

₹2,049

The IS 021 is a gun metal horizontal lift check valve designed for use in piping systems where the flow must be stopped when the system pressure reaches a predetermined value (the actuation pressure). The valve is manufactured from gun metal and has a screwed-in cover, which provides protection against damage to the sealing face by foreign objects entering the system or accidental contact with hot surfaces during maintenance work on other parts of the system The IS 021 is suitable for use in systems in which there are high pressures or temperatures, such as those found in chemical or petrochemical plants, boiler houses, power stations, etc., but is also suitable for use in general industrial applications requiring automatic shutoff of liquids and gases at predetermined pressures (actuation pressures). This Horizontal Lift Check Valve is manufactured from gun metal and a single piece of solid steel mandrel with integral seats and pressure valves for the cleanest, most reliable seal possible. The body is manufactured from gun metal, with integral seat, spring loaded poppet valves and pre-set at the factory to ensure a leak free seal when installed correctly with no further adjustment required (unless damaged). The IS 021 is a gun metal Horizontal Lift Check Valve that is used to prevent backflow of water or steam into a system when it is not in operation, or under pressure. It has a screwed in cover with a BSP male thread on one end and an integral seat cu-alloy on the other end to provide a seal against pressure. The valve has been designed for use at temperatures ranging from -20°C to +100°C with pressure ratings between 1 and 2 MPa

Leader GM 210 Forged Brass D Air Release Valve 15 mm PN - 16

Ships within 8 days

Leader GM 210 Forged Brass D Air Release Valve 15 mm PN - 16

By Leader

₹754 ~~₹782~~

You save ₹28!

3.58% OFF

The GM 210 Forged Brass Air Release Valve is a durable and reliable product designed to help you get the most out of your air compressor. This valve has been designed to work with a wide range of applications and it can be used in a variety of situations such as industrial applications or construction sites. It is also suitable for use in domestic settings as well as commercial environments where there are high levels of activity on a daily basis. The valve itself has been made from high quality materials including forged brass which means it will last longer than other types of valves available on the market today plus it comes with an array of features that make it stand out from its competitors too! GM 210 Forged Brass Air Release Valve is a high quality air release valve that is used in a wide variety of applications. The forged brass body ensures durability and long life, while the stainless steel spring provides reliable operation with minimal wear. The PP float disc and rubber O-ring provide reliable sealing and sealing capabilities. The valve features a forged brass construction, which makes it durable and resistant to corrosion. The valve has a 24 bar Hyd. Float with PP, Spring - SS304 rubber o-ring and rubber disc, float - PP. This air release valve is designed to be used with 24 bar hydropneumatic systems and has a B.T.P. (bargaining temperature pressure) of 24 bar. The unit comes with a PP spring and an SS304 rubber O-ring, which will help ensure that it performs optimally in your system.

Leader 3/4 Inch, 20 mm Forged Brass Pressure Reducing Valve FLB 123

Ships within 8 days

Leader 3/4 Inch, 20 mm Forged Brass Pressure Reducing Valve FLB 123

By Leader

₹2,359 ~~₹2,483~~

You save ₹124!

4.99% OFF

This is a spring loaded piston type B.T.P. pressure reducing valve, which has a forged brass body and a spring loaded piston type of operation. It is used for reducing the pressure of liquids and gases with a maximum inlet pressure of 27 kg/cm2 (37,500 psi) and an outlet pressure ranging from 0.5 to 6 kg/cm2 (0 to 100 psi). The valve has two seat options: integral seat or non-integral seat with resilient disc as the sealing member. The FLB 123 Forged Brass Pressure Reducing Valve Spring Loaded Piston Type B.T.P. - 37.5 Kg/CM2 Hyd. is a pressure reducing valve designed to be used in hydraulic systems. It has a maximum inlet pressure of 27 Kg/CM2 Hyd and an outlet pressure of 0.5 to 6 Kg/Cm2 Integral Seat Resilient Disc. The FLB 123 Forged Brass Pressure Reducing Valve Spring Loaded Piston Type B.T.P. - 37.5 Kg/CM2 Hyd. is a pressure reducing valve that can be used in a variety of applications, including residential and commercial water systems, as well as industrial applications. This valve features an integral seat resilient disc that allows for smooth operation, even under heavy pressure conditions. The metal components are made from forged brass, which makes them strong enough to withstand the rigors of daily use without wearing out or breaking down over time. It is used in conjunction with an open-center air compressor, which reduces the pressure of air entering the system to less than one atmosphere. This prevents overloading and damage to the equipment or machinery being run by the compressed air.

Leader 12.7 mm (1/2 Inch),15 mm Gun Metal Vertical Check Valve GM 048

Ships within 8 days

Leader 12.7 mm (1/2 Inch),15 mm Gun Metal Vertical Check Valve GM 048

By Leader

₹683 ~~₹697~~

You save ₹14!

2.01% OFF

Leader GM 066 Gun Metal D Ball Float Valve 15 mm PN - 10

Ships within 8 days

Leader GM 066 Gun Metal D Ball Float Valve 15 mm PN - 10

By Leader

₹1,887 ~~₹1,932~~

You save ₹45!

2.33% OFF

The GM 066 Gun Metal Ball Float Valve PN - 10 Rough Body with Plastic Ball B.T.P. - 15 Bar Hyd. S.T.P. - 11 Bar Hyd., manufactured by Leader, is a ball float valve that has been designed to work with a variety of liquids and gases. The body of this device is constructed from gun metal and has a rough finish, while the ball is made of plastic. This product can be used in applications involving compressed air, water, oils, and even acids under pressure up to 15 bar. It is made from gun metal and has a plastic ball inside the body of the valve that moves up and down to control flow, like a faucet. The ball is what controls how much water comes out, so when you turn on the water, it can fill up your bathtub or wash machine until it reaches a certain level and then shuts off automatically. It has a high-quality, durable ball valve with a metal body that can be used in a variety of applications, including industrial piping systems and other water-based systems. This valve is made from gunmetal, which is an alloy of copper and tin, and has a rough finish for improved wear resistance and corrosion resistance. This valve features a plastic ball that helps to prevent corrosion from occurring on the threads at the top of the valve's housing; this helps ensure that your equipment lasts longer than it would if you were using another material instead (such as brass or stainless steel).

Leader 2-1/2 Inch, 65 mm Cast Iron Wheel Operated Gate Valve CI 004

Ships within 8 days

Leader 2-1/2 Inch, 65 mm Cast Iron Wheel Operated Gate Valve CI 004

By Leader

₹8,849 ~~₹9,404~~

You save ₹555!

5.9% OFF

It is a high quality valve made from carbon steel solid wedge, which makes it resistant to corrosion and abrasion after long term use in harsh conditions. This product has been designed with a low profile design to reduce the amount of space it takes up when installed, making it ideal for use in small spaces like bathrooms or kitchens where space can be limited. This valve comes with an adjustable bonnet which allows you to adjust the opening size according to your needs so that you can control how much water flows through your system at any given time depending on what kind of work you are doing at home (such as washing dishes or taking a shower). CI 004 Cast Iron All Iron Gate Valve Class-125 Bolted Bonnet, Inside Screw, Non-Rising Stem B.T.P. -20.7 Bar Hyd. S.T.P. - 15.18 Bar Hyd is a part of our CI series of cast iron valves that can be used for process applications in a wide variety of settings where corrosion resistance and durability are important factors in the choice of materials used for their construction and assembly processes used during their manufacturing process which includes the following types: ball valves, butterfly valves, gate valves or globe valves depending on your requirements at an affordable price without sacrificing quality at all costs possible due to our strict quality control measures taken into account during each stage of production from raw material selection through final packaging before shipping it out to any customer worldwide interested in purchasing these products from us directly online as well

Leader 2 Inch, 50 mm Cast Iron Reflux Valve CI 021

Ships within 8 days

Leader 2 Inch, 50 mm Cast Iron Reflux Valve CI 021

By Leader

₹7,551 ~~₹8,260~~

You save ₹709!

8.58% OFF

This is a CI 021 Cast Iron Reflux Valve IS: 5312 PN - 1.6 Bolted Cover B.T.P. - 2.4 MPa Hyd.S.T.P. - 1.6 MPa Hyd that is made from the best quality raw materials and is manufactured by our experts based on the international standards and industry norms using latest technology and sophisticated machinery with complete adherence to all safety measures and guidelines laid down by the government or industry bodies so that it can be used in various industries like oil refineries, petrochemicals, chemical plants etc without any problem because of its excellent quality in terms of strength, durability etc and also ensures long lasting performance without any maintenance cost so as to provide excellent value for money to our esteemed customers in various industries across the globe. This product has been tested and meets the standards outlined in IS:5312, which are accepted throughout the International community as an industry benchmark for quality assurance and consistency of product performance. This product is made with durable cast iron, which makes it durable enough to withstand high temperatures and pressures, while also being lightweight enough for easier installation and maintenance by operators or technicians who work on the system regularly or only occasionally need access to the valve itself (depending on how often you intend on using your unit).

Leader CI 052 Cast Iron Equilibrium Float Valve 150 mm Class - 125

Ships within 8 days

Leader CI 052 Cast Iron Equilibrium Float Valve 150 mm Class - 125

By Leader

₹1,15,639 ~~₹1,25,540~~

You save ₹9,901!

7.89% OFF

Leader CI 092 Cast Iron Y-Type Strainer 32 mm PN - 25

Ships within 8 days

Leader CI 092 Cast Iron Y-Type Strainer 32 mm PN - 25

By Leader

₹2,123 ~~₹2,206~~

You save ₹83!

3.76% OFF

This product is made from cast iron, it is highly durable, and it can be used in high-pressure applications that require a type of material that is able to withstand heat over long periods of time without warping or deforming. The manufacturer recommends using this product only in systems where there are no solids or liquids that could damage the interior of this product due to its lack of internal seals or gaskets (which would otherwise prevent such damage). This product is used to protect pumps and motors from damage caused by solids that may be present in liquids or gases, while allowing flow through the device at low pressures. This product is used primarily in the oil and gas industry to help remove particulate from fluids, but can also be used for medical applications and other industrial uses where particulate removal is required or desired. it can be used in the chemical and food industries for water filtration purposes or for other applications where water filtration is needed. The cast iron construction of this strainer makes it resistant to corrosion, making it ideal for use in water treatment plants, chemical plants, and other industrial settings where corrosion may be an issue.

Leader CI 093 Cast Iron Y-Type Strainer 200 mm PN - 16

Ships within 8 days

Leader CI 093 Cast Iron Y-Type Strainer 200 mm PN - 16

By Leader

₹43,454

The product is made up of cast iron and features a compact design that can be easily installed at any point in the piping system to separate solids from liquids. This is a high quality product that has been tested to the highest standards, meeting the requirements of BS, DIN, ISO and ANSI standards. The CI 093 Cast Iron Y-Type Strainer PN - 16 is a strainer that has been tested to 24 Kg/Cm2 SS (Type 304) screen having 1MM Dia Perforation. It is made of cast iron and comes with a 'Y' Type. This product is available at a great price and would make a perfect addition to your toolkit. This strainer is made from cast iron and has a PN - 16 connection. It features a y-shaped outlet that allows for multiple pipes to be connected at once. To install the strainer, simply attach it to each pipe with a bolt or screw. The CI 093 can be used in many industrial applications, including: oil fields, petrochemical plants, refineries, chemical plants and more! It is designed to be used in various industries such as food processing, oil and gas, power generation and water treatment. The cast iron strainer is ideal for use in applications where medium and fine particle size is required.

Leader 12.7 mm (1/2 Inch), 15 mm Cast Carbon Steel Ball Valve CF8016A

Ships within 8 days

Leader 12.7 mm (1/2 Inch), 15 mm Cast Carbon Steel Ball Valve CF8016A

By Leader

₹5,073 ~~₹5,118~~

You save ₹45!

0.88% OFF

The Leader Cast Carbon Steel Ball Valve is a two piece design ball valve that is designed for harsh environment applications. It meets BS EN ISO 17292/API 6D Class 150 standards. It has two port types including B.T.P., S.T.P., as well as air only porting options in accordance with these standards. Made from CF8 steel with SSCR surface treatment and nickel zinc plating, this valve has a stem made from ASTM A276 410 stainless steel. The cast carbon steel body forms an integral part of the stem allowing it to be replaced without dismantling the entire assembly if required. It features renewable RPTFE seals which have excellent reliability and durability in hostile environments unlike metal alloy or plastic seal materials. It handles liquids, gases and steam in process industries including petrochemicals, pharmaceuticals and sugar. The carbon steel device offers mechanical properties at a higher level than cast iron or stainless steel and can be used for handling corrosive fluids at higher temperatures and pressures. This valve also features either stainless steel or carbon steel bolting. Constructed from cast carbon steel, the ball valve can be used for service water and air applications. The highly reliable control provided by the double seal design will ensure that contamination does not enter your system.

Leader 2 Inch, 50 mm Cast Steel Butterfly Valve CCS 015

Ships within 8 days

Leader 2 Inch, 50 mm Cast Steel Butterfly Valve CCS 015

By Leader

₹6,371 ~~₹6,854~~

You save ₹483!

7.05% OFF

Butterfly valves are designed to regulate the flow of gases, liquids, or slurries. The valve is often used in many applications such as plumbing for domestic water supply, air conditioning and refrigeration, chemical processing, power plants, and other industrial facilities. When the butterfly valve is in the fully open position, it allows fluid to flow freely in either direction; however when the butterfly valve is partially closed, it stops fluid flow in one direction but still allows fluid to flow through it in the reverse direction. The butterfly valve's main body has two elongated holes--the upper hole (called a guide) and the lower hole (called a seat). The hole at the top of the body is mounted on a shaft which can turn freely within the body. This shaft is connected to another shaft that sticks out of the body in an opposite direction from where it was mounted. This second shaft has a handle or lever attached to it for opening and closing the valve by hand. The butterfly valve requires very little operating clearance. The smooth rotation of each handwheel makes it easy to adjust the flow of water or gas in any situation. This product is perfect for industrial settings like refineries, petrochemical plants, pulp and paper mills, and food processing plants—and is also great for home use in many plumbing applications like shower heads and faucets.

Leader 2 Inch, 50 mm Stainless Steel 304 Ball Valve CSS 027

Ships within 8 days

Leader 2 Inch, 50 mm Stainless Steel 304 Ball Valve CSS 027

By Leader

₹30,679 ~~₹31,942~~

You save ₹1,263!

3.95% OFF

In a competent tone: A ball valve is a type of valve that uses a sphere to control a hole in the pipe. It is one of the most general types of valve, and it also has a wide range of sizes. Ball valves are used to control fluid flow in systems that require shut offs, but they can also be used as on-off valves. The most basic way to classify ball valves is by their orientation; there are vertical, horizontal, and inline valves. These terms are important because each type has its own unique set of requirements for mounting and orientation. Vertical ball valves have an inlet at the bottom and outlet at the top, while horizontal ones have an inlet on one side and outlet on the other. Inline ones have both outlets on the same end, but can also be installed vertically or horizontally if necessary. Technically speaking, all ball valves operate using either a threaded connection or a flanged connection. This means that they all connect to pipes using either nuts or flanges that thread onto ends of pipes or tubing. Flanges are usually used when the pipes being connected are made out of metal, while threaded connections are usually used when pipes are plastic or PVC piping.

Leader 2 inch, 50 mm J Cast Steel Y-Type Strainer, BM 078

Ships within 8 days

Leader 2 inch, 50 mm J Cast Steel Y-Type Strainer, BM 078

By Leader

₹14,159 ~~₹14,956~~

You save ₹797!

5.33% OFF

The Leader 2 inch, 50 mm (BM 078) Y-Type Strainer stands as a critical component in fluid control systems, meticulously engineered to ensure the purity and integrity of liquids in industrial applications. Crafted with precision from high-quality materials, such as durable cast iron or stainless steel, this Y-type strainer is designed to effectively remove solid particles and debris from flowing liquids, safeguarding downstream equipment and processes. The robust construction of the strainer enhances its durability, making it well-suited for applications in diverse industries, including petrochemical, water treatment, and manufacturing. The Y-type configuration of this strainer allows for efficient and effective filtration, capturing particles that could potentially damage pumps, valves, and other sensitive components in the fluid system. The leader Y-Type Strainer is equipped with a removable screen or mesh, facilitating easy maintenance and cleaning, ensuring uninterrupted and efficient operation over an extended period. Engineered to meet industry standards, the Leader Y-Type Strainer provides a reliable and cost-effective solution for fluid filtration. Its versatility allows for integration into various fluid systems, offering protection against contaminants and ensuring the smooth operation of industrial processes. In summary, the Leader Y-Type Strainer exemplifies durability, precision engineering, and adaptability, making it an indispensable component for those prioritizing the purity and efficiency of fluid systems in a wide range of industrial applications.

Leader 3/4 inch, 20 mm F Bronze Fusible Plug, BM 082

Ships within 8 days

Leader 3/4 inch, 20 mm F Bronze Fusible Plug, BM 082

By Leader

₹3,468

The Leader 3/4 inch, 20 mm (BM 082) Fusible Plug is a critical safety component designed to protect boilers from catastrophic failures due to overheating. Crafted with precision engineering and durability in mind, this fusible plug serves as a reliable last line of defense in steam boiler systems. Typically made from high-quality materials such as brass or bronze, the fusible plug is strategically placed in the boiler's crown sheet. The primary function of the fusible plug is to melt and release its fusible alloy core when the temperature in the boiler exceeds a safe limit, preventing a potential explosion. The fusible alloy used in the Leader Fusible Plug has a lower melting point than the critical temperature for boiler safety, allowing it to act as an early warning system. As the temperature rises, the fusible alloy melts, creating an opening that releases steam and alerts operators to the dangerous conditions. This rapid release of steam helps to cool the boiler and mitigate the risk of a catastrophic failure. Engineered to meet industry standards, the Leader Fusible Plug is a crucial safety feature in steam boiler applications, providing peace of mind to operators and preventing the dangerous consequences of boiler overheating. Its robust construction and adherence to safety regulations underscore the Leader brand's commitment to manufacturing high-quality components that contribute to the overall safety and reliability of industrial processes.

Page 1 of 59 results

Product Name	Specifications	Expected Price	Dispatch Time	Discount
Leader CI 093 Cast Iron Y-Type Strainer 40 mm PN - 16	Material Cast Iron \| Pressure PN - 16	₹3,670	8 days	--
Leader GM 230 Gun Metal J Y-Type Strainer 50 mm	--	₹6,371	8 days	4.43% OFF
Leader Gun Metal Globe Valve 15 mm 1.5 Mpa (217.5 psig) Isi To Is 778	--	₹1,096	3 days	--
Leader GM 275 Forged Brass H Double Regulating Balancing Valve With Nozzle 32 mm PN - 16	Body Material Forged Brass \| Disc Type Teflon	₹5,309	4 days	--
Leader 3 inch, 80 mm Ductile Iron Swing Check Valve, CI 017	--	₹14,159	8 days	13.89% OFF
Leader 1 Inch,25 mm Gun Metal Horizontal Lift Check Valve IS 021	--	₹2,049	8 days	--
Leader 2 Inch, 50 mm Cast Iron Butterfly Valve CI 091	--	₹3,067	8 days	0.87% OFF
Leader 3 Inch,80 mm Cast Iron Wafer Type Check Valve CI 038	Body Material Cast Iron \| Disc Material Stainless Steel 304	₹2,314	8 days	--

Leader Products Online

Top Selling Leader Products Online Products Price List for April 2026