Filter

Categories
Price Range
Min Price:
Max Price:
-
Discount
Express Shipping

Colorado Products Online

Showing 40 out of 125 products

Sort by
₹577  
The Colorado 200A magnetic welding holder securely holds metal sheets up to 1-1/2" thick with minimal effort. This magnetic welding holder features a four-point clamping system for secure hold during welding. The four 2-1/2" wide x 4-3/8" long nickel plated steel jaws grip the metal from all directions, eliminating slippage and jamming. It also includes a durable L-shaped handle for easy manipulation and a 9/16" diameter by 4-1/4" long carbide tipped swivel base that rotates 360° and is designed to accept a 3/8"-16 thread mounting bolt. This holder has a maximum capacity of 1.25" (1.00" round, 0.25" x 0.50" hole). The holder includes a removable pin for easy adjustment and replacement of the magnets, which are capable of holding up to 15 pounds each. This tool is designed for all kinds of position welding and cutting on flat, round bars and steel plates by using the magnetic principle. The holder has a strong magnetic force, with other advantage such as light weight, safe and convenient to carry out. The Magnetic Welding Holder can be widely used in many industries, including the automobile industry, construction industry, electronics industry, shipbuilding industry and so on. The versatile holder can be attached to any metal surface, including overhead structures, with its strong magnet and can hold up to 1/2". The welding holder has a magnetic base to hold it in place while you weld, and a spring-loaded arm that can hold your work piece at any angle. The arm extends up to 7 inches to give you plenty of room for your project.
₹601  
The Colorado 600A Connector Stud is a three-pronged device for connecting the wires of a power supply to the power supply's housing, which is then plugged into an outlet in order to receive electricity. They are also used for terminating the end of an electrical wire that comes from an appliance or device. The name "connector stud" refers to the fact that it is used to connect two wires, such as from two different appliances, together. It allows the wires to be connected but also separated when necessary. It has been used for grounding and power applications in industrial control panels, factory equipment, and farm machinery. This stud is made of high grade steel and it comes with a MIG welded zinc plated finish. It is designed to be used in conjunction with other products, such as crimp nuts and fish tape, to complete a connection. The connector studs are manufactured using a proprietary process employing high impact polymer materials and chemical compounds which allow them to withstand temperatures up to 250 degrees F. It is designed so that the size of the stud is proportional to the size of the outlet box; this proportionality helps avoid overloading a stud with too much force and supports any load placed on it. The stud has a threaded coupler for connecting boxes together and also includes precise instructions for its use. These connectors come in many shapes and sizes, but the most common form is a straight male and female connector that fits together with a threaded interface. This allows for easy connection, but the threaded studs can also be tightened with a wrench to ensure the wire stays put.
₹435  
The Colorado 600A Male/Female Connector is a connector designed to join two 600A power cords together. The connector will allow the joined cords to be easily disconnected by simply pulling on the release tabs located on both sides of the connector. The design of this connector prevents accidental disconnection by securely holding the connection together when in use. The cable can be used for connecting a solar panel system to an inverter, or connecting solar panels to one another. The connector has two twist-on connectors that can snap on to two other twisted wire ends. It also has a ground wire attached to the bottom. The insulation may be made of either plastic or glass. Both types are used for high voltage, indirect applications. The most common use for this joint is in the electrical distribution industry, and it is typically used to connect medium voltage lines to high voltage lines. It also features a standard locking latch for easy installation, which requires only a single action to engage or disengage the connector. The connector housing is made of polycarbonate plastic, and the contact surface inside the housing is made of highly conductive phosphor bronze. This unit is designed for use in electrical systems that are 600 amps or less and that are below ground level. It utilizes the three-point connection system, which offers both flexibility and support. The connectors are genderless and non-polarized, which makes them versatile. The connectors are also corrosion resistant and can withstand temperatures between -40°F and 260°F.
Pack of 10 piece
₹3,657  
The Colorado Corded Tungsten Electrode is a highly versatile piece with a unique design. The Colorado Corded Tungsten Electrode is made of annealed tungsten wire and has been treated to provide the best possible conductivity. The electrode's small, round shape allows for easy access to hard-to-reach spaces, and its short length means that it can be used in a variety of different applications. The tungsten electrode has a diameter of 0.07" (1.8 mm) and contains a ceramic layer as well as a silver thermal barrier layer. The silver thermal barrier layer prevents damage to the ceramic coating during installation and removal of the electrode from the device. The silver thermal barrier layer also helps to improve adhesion between the ceramic coating and tungsten by reducing frictional heat generated during the bonding process. It is used as an energy source for plasma-arc cutting, which is a process in which a high-energy, pulsing electric arc is formed between two tungsten electrodes. The arc melts the metal being cut, and the surrounding gas is superheated to create a high-pressure stream that sears the surfaces of the material being cut. The result is a smooth and clean cut with less distortion than other methods such as water jet or laser cutting. The drying process uses heat to harden the coating, but this also causes it to shrink and become brittle, so when it is exposed to high temperature during welding, it tends to flake off in large pieces that must be removed from the weld pool manually.
₹565  
Colorado 600A cable connectors are the standard for high-voltage power transmission. They are used to connect copper cables in various types of substations, as well as in power plants and large industrial facilities. They also have applications in underground transmission lines, where their durability can be extremely useful. They come in a variety of different sizes, so it is important that you buy the right one for your application. They are made with only the most advanced materials. They feature a solid copper core with a copper-clad steel center pin and a copper-clad housing. The connectors include a jacketing material designed to protect the core from any damage or wear that could occur over time during use. It also keeps the exterior from getting damaged from unintended abrasions at home or on the job site. The outer cover also serves another purpose: it provides an easy grip for technicians who will be working with them on a regular basis. They are used for connecting and disconnecting a variety of electrical cables in applications including data, telephone, security, fire alarm, power and solar. The connectors feature a push-pull locking system with positive detent to ensure connection is secure and reliable. The wire entry is on the bottom of the connector, avoiding accidental disconnection issues that come with other types of connectors. This connector is designed to connect 600A cable in a 2-conductor installation by using a single bolt-washer combination. It is ideal for use in high-power distribution and transmission applications, including mining, industrial, utility and off-grid power generation where high current and voltage are required.
₹3,303  
The Colorado 170A is a portable, fuel-fired welding torch that works with MIG and TIG welding processes. Its high amperage and voltage output are capable of handling steel up to 3/4" thick, making it an ideal choice for heavy-duty applications like agricultural equipment, tractors, and automotive components. The torch's 1/4" diameter cable makes it easy to connect to the gas tank for fuel. The 1/2" diameter hose can be connected to a regulator with a flow rate of 4-7 CFH at 250 psi. It has a high quality CGA-580 regulator to ensure that it doesn't burn too hot. The torch also comes with a two-piece stainless steel ground clamp and a heavy duty power cord. The torch has a ceramic nozzle that helps to protect the flame from contamination by dirt or moisture. The ceramic nozzle also allows the flame to burn hotter and cleaner, which is essential for cutting and welding applications. The torch provides a stable, high-quality flame; it has two pneumatic cylinder controls that regulate fuel and air. It uses a 3/8-in. fill hose and is equipped with a 6-in. by 10-in. heating tip. A complete kit includes the welding torch, handle, tip, hose and regulator. The torch unit meets OSHA specifications for acetylene torches but operates on propane fuel instead of acetylene gas—the result is a lighter torch that's safer to handle than one filled with highly flammable acetylene gas. The welding torch comes with a variety of attachments to work with different materials. It has a gas pressure control knob, which is helpful when working with thin metals like aluminum or copper. The torch has an adjustable flame, so you can choose how big or small you want your flame to be and it will stay that size as you move along your project.
₹778  
The 300A Welding Holder is a rugged, portable clamp for holding a grinder or welder during welding. It's capable of holding the heaviest grinders and welders due to its massive cast-iron base and large steel hook. The hook can be opened wider than any other welding holder, making it superior. It has a welded steel base with an aluminum support arm that has a swivel top and an adjustable clamping mechanism. This holder will accommodate pipe from 3/4" to 2". The base clamp is made from a flat piece of steel with a curved bend at one end. It has an opening on one side and has holes where bolts can be screwed through it to secure it to a surface. On top of the flat piece of steel there is another flat piece with a screw hole near the center which goes through the curved bend of the first piece of metal. It also has a swivel that allows you to maneuver your workspace and adjust the angle of your welding at any time. This is perfect for those times when you need to make an adjustment mid-job, like when you're working on something large and need to move it into position or if you need to get better access to an area. These holders are widely used in a variety of applications, including testing of pipeline samples, installation of pipeline equipment and performing other pipeline maintenance activities. The dual-axis design also allows you to weld at any angle between 0 degrees to 360 degrees. This holder will fit almost any pipe size with its adjustable arms.
₹1,100  
The Colorado 600ml Spray Gun is crafted from aluminum, ensuring durability and heat resistance. The ergonomic handle provides a secure, comfortable grip that helps reduce fatigue during extended use. The valve is made of brass and features a lockout trigger to prevent accidental spraying. It's equipped with a stainless steel needle for consistent ink flow and the nozzle can be replaced with either a conventional orifice or tip-on nozzle for use with different-sized cans. The spray gun’s frame is made from aluminum so it is both lightweight and durable. The Colorado 600ml Spray Gun also has an internal pressure regulator that allows for fine-tuned control over the paint flow, making it ideal for all kinds of projects—from furniture to walls, and everything in between. It also comes with an integrated high pressure hose which makes it incredibly easy to clean up after you are done. Made of durable, hardened aluminum, it's ideal for a variety of projects including car refinishing and furniture restoration. It features a convenient belt hook and an ergonomic handle that fits nicely in the user's hand for maximum comfort. It has been specifically designed to evenly spray coat hard surfaces with ease, even when applied at an angle. The gun comes in a case with a lid that doubles as a paint palette, which can hold up to six ounces of paint. It also comes with three different spray patterns: the wide fan spray pattern (flowing at 1.0 liters per minute), the flat fan spray pattern (flowing at 0.4 liters per minute), and the cone spray pattern (flowing at 0.4 liters per minute).
₹813  
Colorado 500ml spray gun is a high-quality spray gun that allows to finish surfaces with ease. The spray gun holds approximately 2 cans of paint, allowing artists to get several full colors out of each can. The heavy-duty pistol grip makes it easy to maneuver and control while spraying. To prevent unwanted dripping, this sprayer has an internal drip-stop valve. With a maximum flow rate of 3.3 liters per minute, this gun is capable of delivering a smooth finish on both small and large surfaces. The compact size makes it easy to move around the work area, and the wide handle makes it comfortable to hold for long periods of time. The button on the handle allows the operator to change between vertical and horizontal spraying, making it ideal for getting into corners or areas that are difficult to reach with a conventional sprayer. This unit includes a clear visor that keeps overspray out of your eyes while also protecting them from bright sunlight. The handle allows you to put your fingers right over the nozzle, which makes it easier to adjust the pressure setting while you work. It's a high-quality tool that's easy on the hands and adapts to any painter looking for an excellent way to get every last drop out of their paint can. The silicone sleeve grips the can securely without damaging it, and there are three adjustable settings for pressure control. The spray head is designed for full coverage with no overspray, and it has a 1/4" nozzle tip that creates a wide spray pattern for maximum coverage on a variety of surfaces.
₹4,837  
Colorado 20m Welding Machine cable is a kind of high quality welding machine cable, which is resistant to oil, water and abrasion. The cable is widely used for the connection of welding machine and welding power supply in welding factory. Colorado Welding Machine Cable (20m) is designed for welding machine, and etc. It is used in the steel industry and in construction to weld various materials, such as steel plate, angle steel bar, channel bar, tube and pipe. It is a very flexible cable, which makes it suitable for use with various types of machinery. This enables the cable to be used in a wide variety of applications. It has also been designed to provide great quality and durability, to ensure that the cable will last for an extended period of time. It has been designed specifically to be used in situations where high temperatures are created during welding processes. It helps in connecting to all the parts of the machine and to the power supply, along with being an excellent conductor. The cable comes with a temperature proof sheath and can be used in any weather condition. It provides maximum flexibility to users who work on different types of construction sites or industries. This cable can be used for heavy duty purposes for a long time without any issues. It is also resistant to heat, oil and abrasion which makes it a perfect choice for workers who are looking for a durable product. The Welding Machine Coolant Hose has been designed to offer maximum flexibility
₹471  
The Colorado 600A Cable Plug Socket is an in-wall device that houses two separate outlets with different electrical ratings. It is built to be used as a standard, in-wall receptacle or as a cable or satellite box connection point. The outlet cover, which is included and already attached to the device, can be easily removed, allowing for access to the connections within the unit. The bushing is made of zinc plated steel with a thermoplastic insulator. This unit can be used to terminate medium voltage cables up to 600A. Its stainless steel and nickel plated body provides it with excellent corrosion resistance, which makes it ideal for use in marine and outdoor environments. The set is designed to maximize the use of space in an electrical outlet and installs in a standard 110V AC electrical outlet. It contains three power outlets, each with a safety shut off switch, and two USB ports. The socket is designed with a preload clamp that ensures proper termination to the wire. In addition, the Colorado features a lockable cover that protects the terminal screws from tampering. The socket is designed with a preload clamp that ensures proper termination to the wire. In addition, the Colorado features a lockable cover that protects the terminal screws from tampering. This socket can be used with TV sets, computers, coffee makers, and other appliances that use power. It is made from high-quality materials that are designed to keep the product functioning perfectly for many years. The powder coat finish also helps to protect against rust and corrosion. This socket is a great choice if you need something tough and durable to withstand heavy use.
Recommended Items
sku-leadTime Ships within 10 days
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
sku-leadTime Ships within 2 days
oos-available Ships within 24 hrs
oos-available Ships within 24 hrs
Browsing History
sku-leadTime Ships within 5 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 3 days
sku-leadTime Ships within 7 days
sku-leadTime Ships within 10 days
sku-leadTime Ships within 6 days
₹44,099 ₹54,600
19.23% OFF
RELATED CATEGORIES OF COLORADO PRODUCTS ONLINE
EXPLORE BRANDS RELATED TO COLORADO

Top Selling Colorado Products Online Products Price List for April 2026

Product Name Specifications Expected Price Dispatch Time Discount
Colorado Spray Gun Compressor Pipe 10 m (32 ft) Blue Plastic Outer Dia 14 mm, Inner Dia 10 mm, for All Kinds of Spray, Air Assisted Sprayer Color Blue | Flow Rate 325 l/min ₹707 3 days --
Colorado Pneumatic Pipe Coil Hose Blue 8x5 mm, 10 m Length for Air Assisted Sprayer -- ₹719 3 days --
Colorado Adjustable Car Wash Gun with Snow Foam Lance 6.35 mm (1/4 inch) High Pressure Air-Assisted Sprayer Bottle Color White | Flow Rate 700 l/min ₹1,014 2 days --
Colorado Air Plasma Cutting Torch Body 5 mm Cutting Thickness P80 Certification ISO 9001:2015 CERTIFIED COMPANY, AN ISO 9001:2015& GOVT. | Compatible Models P80 ₹2,005 3 days --
Colorado 600ml Spray Gun -- ₹1,100 8 days --
Colorado Plasma Cutting Consumables Standard Fit for CUT-40, CUT-50D, CT-312 Flambe Torch, PT-31 (Pack of 65) Color White | Fuel Capacity 123 ml ₹3,421 3 days --
Colorado Wooden Clothes Hanger (Pack of 10) Length 29 cm | Material Wood ₹494 3 days --
Colorado Air Spray Gun Furniture Paint 1.5 mm Pneumatic High Pressure HVLP Sprayer, F-75 Flow Rate 230 l/min | Maximum Pressure 30 N/m ₹1,769 24 hrs --
Colorado Aluminium Copper Cable Cutter Tool 254 mm (10 inch) Length Body Material Made of Steel | Designed For Cutting ₹789 30 days --
Colorado Plasma Cutting Torch Head Body with Button Switch Red Handle & Spanner Certification ISO 9001:2015 CERTIFIED COMPANY, GOVT. MSME. CERTIFIED C | Compatible Models P80, P100 ₹1,887 3 days --
This data was last updated on 08/04/2026