• Home /
• Hand Tools /
• Clamps & Bolts /
• V-Blocks & Clamping Sets

Have a question? Call us now at +91 9650660070

V-Blocks & Clamping Sets

Showing 40 out of 110 products

Sort by

Recommended New Price : Low to High Price : High to Low

Flash Deal

Ships within 24 hrs

PowerHouse High-Precision Cast Iron V-Shaped Block

By PowerHouse

₹2,241 - ₹6,017

PowerHouse High-Precision CAST IRON V-BLOCK is a magnetic vee block. It comes with high-precision cast iron material. This vee block is ideal for holding small parts, tools or other items in place while working on them. It is a smart tool that will enhance the efficiency of your work by providing you with increased control as well as safety when handling different pieces.

Type of Product : Magnetic Vee Block

Material : High-Precision Cast Iron

Application : Industrial

Color : Silver

Finish Type : Chrome

Explore other Variants (4)

Ships within 5 days

Crystal 76.2 mm (3 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1802HP

By Crystal

Set of 2 piece

₹11,091  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 3 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB9 Magnetic V Block 150X95X75mm

By Gurunanak International

Set of 2 piece

₹12,979  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 5 days

Crystal 203.2 mm (8 Inch) Hardened and Ground Magnetic V Block 1806HS

By Crystal

₹28,319  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Related Searches

sewak v-blocks & clamping sets

unique v-blocks & clamping sets

crystal v-blocks & clamping sets

gurunanak international v-blocks & clamping sets

insize v-blocks & clamping sets

Ships within 3 days

Crystal 152.4 mm (6 Inch) Hardened and Ground Magnetic V Block 1805HS

By Crystal

₹20,059  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 6 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 5 days

Crystal 50.8mm(2 Inch) Hardened and Ground Magnetic V Block Set of 2 Pcs 1803HP

By Crystal

Set of 2 piece

₹5,781  

Accuracy for Squareness Flatness & Parallelism within 5 micron. 'V' Blocks are required for Quality Control, Tool Room and Standard Room. "Crystal" Brand Magnetic 'V' Blocks have high magnetic pull, hence they can be used fro drilling and grinding (both wet and dry) and even for light milling work.
The 'V' Block has a total three magnetic surfaces. Top and Bottom with 90 'V' angle and end surface opposite to switch. All three magnetic surfaces and the two sides are carefully ground. Their accuracy for flatness, parallelism and squareness is within 0.005 mm for 2 Inch 'V' Blocks. When turned "ON" all three magnetic surfaces are activated Simultaneously.
The permanent magnet holds the work firmly in the 'V' and if the block rests on a magnetically conductive surface, it is held firmly to this surface. The magnetic pull is constant and will not decrease eveb after long use. The magnetic system being shielded from penetration of moisture, cannot be damaged by coolants or other fluids.

Add to Cart Buy Now

Ships within 5 days

Crystal Transfer Block 50 x 75 x 75 mm Set of 2 Pcs 1553P

By Crystal

Set of 2 piece

₹4,483  

Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.

Add to Cart Buy Now

Ships within 2 days

OZAR Casted V-Blocks, AVB Series

By OZAR

₹2,359 - ₹2,713

The OZAR Casted V-Blocks, AVB Series are precision-engineered tools designed to securely hold and support cylindrical workpieces for accurate machining, inspection, and assembly processes. These V-blocks are cast from high-quality materials to ensure durability, rigidity, and dimensional stability. The AVB Series is specifically built to handle heavy-duty applications while providing reliable and consistent performance. Each V-block features two precisely aligned V-shaped grooves that allow for easy and secure placement of cylindrical parts, such as shafts or rods, in a vertical or horizontal orientation. The design ensures minimal movement during operations, enhancing safety and accuracy. These V-blocks are often used in conjunction with clamping devices or alongside other workholding solutions, making them ideal for tasks such as grinding, milling, and honing. The AVB Series comes with additional features like through holes for clamping and mounting, and are typically manufactured with a high tolerance for precision and ease of use. The casted material provides a robust foundation, while the surfaces are often ground or finished to ensure a smooth, flat working area. Whether used in machine shops, quality control environments, or assembly lines, the OZAR Casted V-Blocks deliver exceptional value and performance for a variety of industrial applications.

Type of Product : Casted V-Blocks

Explore other Variants (2)

Ships within 5 days

TORRENS Soft Magnetic V Block 932

By TORRENS

₹3,303  

The sturdy and compact Magnetic V Block is ideal for applications such as mechanics, construction, plumbing and welding. The V-shaped design allows wood, metal and plastic pieces to be turned up side down without damaging them. Featuring an easy-to-hold metal handle, this tool features a rubber base which resists damage from metal shavings. It has a heavy duty feel, with the added benefit of a magnetic bottom to hold the work piece in place. This product is a one stop solution to fix the problem of keeping small and hevy parts steady in one place in a production environment.

Add to Cart Buy Now

Ships within 3 days

TORRENS Hard Magnetic V Block 936

By TORRENS

₹8,377  

The sturdy and compact Magnetic V Block is ideal for applications such as mechanics, construction, plumbing and welding. The V-shaped design allows wood, metal and plastic pieces to be turned up side down without damaging them. Featuring an easy-to-hold metal handle, this tool features a rubber base which resists damage from metal shavings. It has a heavy duty feel, with the added benefit of a magnetic bottom to hold the work piece in place. This product is a one stop solution to fix the problem of keeping small and hevy parts steady in one place in a production environment.

Add to Cart Buy Now

Ships within 3 days

Assorts V Block Pair Tool Steel 40x44x72 mm Size for Enhanced Stability

By Assorts

₹2,359  

The V Block Pair from Assorts. This high-performance Workshop Tools, model: , is expertly crafted with Tool Steel 40x44x72 mm Size for Enhanced Stability for exceptional durability and flawless operation. Designed for professionals who demand the best, this component delivers consistent and accurate results for all your intricate projects. The V Block Pair is the ultimate choice for quality and efficiency in your workshop.Upgrade your equipment with the superior engineering of the Assorts V Block Pair. The thoughtfully selected Tool Steel 40x44x72 mm Size for Enhanced Stability are optimized for longevity and peak performance, ensuring it withstands the rigors of heavy use. Its robust design guarantees a seamless fit and operation, providing the crucial precision you need for every task. Choose the V Block Pair for a powerful, dependable addition to your equipment that you can trust.

Add to Cart Buy Now

Ships within 3 days

Assorts V-Block Pair Cast Iron 50 mm (2 Inch) Size 52x38x25 mm Dimension

By Assorts

₹2,831  

Achieve unmatched precision and reliability with the V-Block Pair Cast Iron 50 mm (2 Inch) 52x38x25 mm from Assorts. This high-performance Workshop Tools, model: , is expertly crafted with for exceptional durability and flawless operation. Designed for professionals who demand the best, this component delivers consistent and accurate results for all your intricate projects. The V-Block Pair Cast Iron 50 mm (2 Inch) 52x38x25 mm is the ultimate choice for quality and efficiency in your workshop.Upgrade your equipment with the superior engineering of the Assorts V-Block Pair Cast Iron 50 mm (2 Inch) 52x38x25 mm. The thoughtfully selected are optimized for longevity and peak performance, ensuring it withstands the rigors of heavy use. Its robust design guarantees a seamless fit and operation, providing the crucial precision you need for every task. Choose the V-Block Pair Cast Iron 50 mm (2 Inch) 52x38x25 mm for a powerful, dependable addition to your equipment that you can trust.

Add to Cart Buy Now

Ships within 5 days

TORRENS Hard Magnetic V Block 934

By TORRENS

₹6,725  

The sturdy and compact Magnetic V Block is ideal for applications such as mechanics, construction, plumbing and welding. The V-shaped design allows wood, metal and plastic pieces to be turned up side down without damaging them. Featuring an easy-to-hold metal handle, this tool features a rubber base which resists damage from metal shavings. It has a heavy duty feel, with the added benefit of a magnetic bottom to hold the work piece in place. This product is a one stop solution to fix the problem of keeping small and hevy parts steady in one place in a production environment.

Add to Cart Buy Now

Ships within 3 days

Crystal 25.4 mm (1 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1714P

By Crystal

Set of 2 piece

₹2,595  

The 'V' Block have two 'V' angles of size to take jobs of dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V' and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V' Block in a pair is within ± 3 micron.
Features:
'V' Block are hardened and ground to 60 HRC.
Precision 'V' Block for Toll Room, Inspection, Work, Assembly Shop.
All sides precision ground, Parallel and square.
'V' groove ground central and parallel two sides & base matched with ± 3 microns.
Supplied with clamp for holding job.
Hold square and round work.
Permits grinding ends of work square with sides.

Add to Cart Buy Now

Ships within 4 days

Aastha Tools Vee Block With Clamps Silver 40X32X32 mm (Set of 2)

By Aastha Tools

Set of 2 piece

₹1,769   ₹3,199

You save ₹1,430!

44.7% OFF

The Aastha Tools Vee Block With Clamps Silver 40X32X32 mm Power & Hand Tool Kit (Set of 2) is a well‑engineered solution from Aastha Tools, crafted to deliver accuracy, durability, and dependable performance in demanding workshop environments. Built with high‑quality materials and designed for professional‑grade use, it ensures consistent output and long operational life. Its precise construction makes it ideal for technicians, machinists, and DIY users who rely on stable and accurate tooling. Whether used for alignment, shaping, measuring, or supporting components, it enhances overall workflow efficiency. Falling under the Precision Workholding Tools category, the Aastha Tools Vee Block With Clamps Silver 40X32X32 mm Power & Hand Tool Kit (Set of 2) provides excellent control, ease of use, and reliability. Aastha Tools's commitment to delivering well‑designed tools is reflected in its sturdy build and smooth functionality. This tool is a perfect addition for workshops seeking performance, precision, and long‑term value in everyday industrial and mechanical operations.

Add to Cart Buy Now

Ships within 4 days

Nicon N-307 Precision Magnetic V-Block Hardened 150x95x75mm MVH150

By Nicon

₹24,779   ₹31,848

You save ₹7,069!

22.2% OFF

Made from Special Alloy Steel
Hardened & Ground Finished
Accuracy 0.005/100mm

Add to Cart Buy Now

Ships within 4 days

Nicon N-307 Precision Magnetic V-Block Hardened MVH100

By Nicon

₹18,879   ₹23,588

You save ₹4,709!

19.96% OFF

Made from Special Alloy Steel
Hardened & Ground Finished
Accuracy 0.005/100mm

Add to Cart Buy Now

Ships within 4 days

Sagar Tools No.508B Tool Makers Steel Vee Block & Clamp (48 x 90 mm)

By Sagar Tools

₹7,197   ₹12,036

You save ₹4,839!

40.2% OFF

The Sagar Tools No.508B Tool Makers Steel Vee Block & Clamp (48 x 90 mm) is an essential tool for precision machining and inspection tasks. Expertly engineered for accuracy and durability, this Vee block is crafted from high-quality hardened steel to ensure excellent dimensional stability and wear resistance over prolonged use. Its 48 x 90 mm size makes it ideal for securely holding round or cylindrical workpieces during drilling, milling, grinding, or layout work. Each Vee block is precision-ground to tight tolerances and features a finely machined V-groove for consistent and centered positioning. The included clamp provides a secure hold, preventing workpiece slippage and enhancing user safety. This tool is especially suited for toolmakers, machinists, and inspection professionals who require dependable accuracy in measuring or setup operations.

Add to Cart Buy Now

Ships within 5 days

TORRENS Soft Magnetic V Block 934

By TORRENS

₹6,371  

The sturdy and compact Magnetic V Block is ideal for applications such as mechanics, construction, plumbing and welding. The V-shaped design allows wood, metal and plastic pieces to be turned up side down without damaging them. Featuring an easy-to-hold metal handle, this tool features a rubber base which resists damage from metal shavings. It has a heavy duty feel, with the added benefit of a magnetic bottom to hold the work piece in place. This product is a one stop solution to fix the problem of keeping small and hevy parts steady in one place in a production environment.

Add to Cart Buy Now

Ships within 3 days

TORRENS Soft Magnetic V Block 938

By TORRENS

₹20,059  

The sturdy and compact Magnetic V Block is ideal for applications such as mechanics, construction, plumbing and welding. The V-shaped design allows wood, metal and plastic pieces to be turned up side down without damaging them. Featuring an easy-to-hold metal handle, this tool features a rubber base which resists damage from metal shavings. It has a heavy duty feel, with the added benefit of a magnetic bottom to hold the work piece in place. This product is a one stop solution to fix the problem of keeping small and hevy parts steady in one place in a production environment.

Add to Cart Buy Now

Ships within 3 days

TORRENS Hard Magnetic V Block 938

By TORRENS

₹23,599  

This extra-power magnetic V block from TORRENS is a great way to increase your accuracy when milling, drilling, or boring square holes in the material. With the three magnetic surfaces turned "ON," the vise can hold objects up to 44 pounds. The powerful magnet ensures that the object stays securely in place while you work, so you never have to worry about it moving around or slipping when you're not expecting it. The block's design also allows you to use it as a simple vise if you don't need its magnetic capabilities.

Add to Cart Buy Now

Ships within 2 days

Crystal Transfer Block 60 x 25 x 100 mm Set of 2 Pcs 1556P

By Crystal

Set of 2 piece

₹4,129  

Transfer Blocks are very useful for grinding thin & odd shape jobs. It is used with magnetic chuck. Magnetic Transfer Blocks provide the simplest method of extending the flux of any magnetic chuck with parallel poles to support work pieces above the chuck face. They do not alter the pole spacing. Always place the laminations in line with inner poles of the chucks, and within the area of the inner poles. When setting up place chuck blocks so as that the maximum number of magnetic loops pass through the work pieces. In such cases, ensure that sufficient securing rivets remain to hold the laminations firmly together.

Add to Cart Buy Now

Ships within 2 days

Crystal 76.2 mm (3 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1712P

By Crystal

Set of 2 piece

₹6,017  

The 'V' Block have two 'V' angles of size to take jobs of dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V' and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V' Block in a pair is within ± 3 micron.
Features:
'V' Block are hardened and ground to 60 HRC.
Precision 'V' Block for Toll Room, Inspection, Work, Assembly Shop.
All sides precision ground, Parallel and square.
'V' groove ground central and parallel two sides & base matched with ± 3 microns.
Supplied with clamp for holding job.
Hold square and round work.
Permits grinding ends of work square with sides.

Add to Cart Buy Now

Ships within 2 days

Crystal 50.8mm(2 Inch) Hardened and Ground V Block With Clamp Set of 2 Pcs 1711P

By Crystal

Set of 2 piece

₹4,011  

The 'V' Block have two 'V' angles of size to take jobs of dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V' and bottom 'V' are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V' Block in a pair is within ± 3 micron.
Features:
'V' Block are hardened and ground to 60 HRC.
Precision 'V' Block for Toll Room, Inspection, Work, Assembly Shop.
All sides precision ground, Parallel and square.
'V' groove ground central and parallel two sides & base matched with ± 3 microns.
Supplied with clamp for holding job.
Hold square and round work.
Permits grinding ends of work square with sides.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB20 Magnetic V Block 200X95X75mm

By Gurunanak International

₹31,859  

Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Features: Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB19 Magnetic V Block 150X95X75mm

By Gurunanak International

₹7,787  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB18 Magnetic V Block 100X95X75mm

By Gurunanak International

₹5,781  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB17 Magnetic V Block 80x70x60mm

By Gurunanak International

₹5,427  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB16 Magnetic V Block 65x65x50mm

By Gurunanak International

₹4,601  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB15 Magnetic V Block 200X95X75mm

By Gurunanak International

₹30,679  

Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Features: Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility

Add to Cart Buy Now

Ships within 4 days

Gurunanak International MVB14 Magnetic V Block 150X95X75mm

By Gurunanak International

₹7,905  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB13 Magnetic V Block 100X95X75mm

By Gurunanak International

₹4,719  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB12 Magnetic V Block 80x70x60mm

By Gurunanak International

₹4,719  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB11 Magnetic V Block 65x65x50mm

By Gurunanak International

₹4,129  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB10 Magnetic V Block 200X95X75mm

By Gurunanak International

Set of 2 piece

₹58,999  

Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Features: Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB8 Magnetic V Block 100X95X75mm

By Gurunanak International

Set of 2 piece

₹9,793  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB7 Magnetic V Block 80x70x60mm

By Gurunanak International

Set of 2 piece

₹7,905  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB6 Magnetic V Block 65x65x50mm

By Gurunanak International

Set of 2 piece

₹6,135  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB5 Magnetic V Block 200X95X75mm

By Gurunanak International

Set of 2 piece

₹51,919  

Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Features: Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility

Add to Cart Buy Now

Ships within 3 days

Gurunanak International MVB4 Magnetic V Block 150X95X75mm

By Gurunanak International

Set of 2 piece

₹9,793  

DESCRIPTION : Fully sealed and Solid steel made. High and constant magnetic pull. Holds cylindrical pieces effectively. Protected against use of coolants. Consists of two vees. Supplied in single piece/matched pairs. Easy On-Off facility PRODUCT SPECIFICATION : Designed for versatility and accuracy, these Vee Blocks are ideal for holding round or irregular shapes for scribing, grinding, measuring, machining and testing applications. All vee’s and faces can be energized or de-energised simultaneously by turning the rotary action control knob. Hence enabling it to hold itself and the work against any flat Ferrous surface. Magnetic Vee Block is an indispensable item of equipment for tool rooms and production departments. Having 3 contact faces, all magnetized at the same time, it will hold itself and will work on any flat ferrous surface. The use of coolants will not effect this Vee Block as it is fully sealed. Vee Blocks are required for quality control, tool room and standard room. These are used for grinding and drilling work and even for light milling work. It can be used on machines fitted with Magnetic Chucks, in such cases there is no need to switch ‘ON’ the chuck. It is sometimes advantageous to use two magnetic Vee Blocks at a time.

Add to Cart Buy Now

Previous Next

Page 1 of 3 results