• Home /
• All Brands /
• ELMEASURE /
• Testing and Measuring Instruments /
• Process Monitoring /
• Single Function Meter

Have a question? Call us now at +91 9650660070

ELMEASURE Single Function Meter

Showing 40 out of 40 products

Sort by

Recommended New Price : Low to High Price : High to Low

Ships within 3 days

Elmeasure High Profile MFM Demand Monitor (LED) RS485 Communication Port, EN8400P

By ELMEASURE

₹9,321 - ₹14,159

The Elmeasure High Profile MFM Demand Monitor (LED) EN8400P is designed for precise monitoring of electrical demand and power parameters in industrial and commercial environments. Equipped with a bright LED display and an RS485 communication port, this multifunction monitor enables accurate measurement of voltage, current, active and reactive power, energy consumption, frequency, and power factor. The RS485 interface supports Modbus protocol, allowing seamless integration with centralized energy management systems for real-time data acquisition and remote supervision.
The EN8400P Demand Monitor provides reliable demand tracking and load analysis to help maintain efficient power distribution and system stability. Its high-profile panel-mount design ensures easy installation and clear parameter visibility within control panels and switchboards. Built for consistent performance in demanding conditions, this device supports continuous monitoring of electrical loads and operational parameters, making it suitable for factories, commercial buildings, and utility panels requiring accurate and dependable energy measurement.

Type of Product : Demand Monitor

Application : Industrial

Display Type : LED

Type : High Profile MFM

Communication Ports : RS485

Harmonics : Industrial Harmonics 31st

Explore other Variants (3)

Ships within 2 days

Elmeasure High Profile 2 Relay Demand Controller 1 Accuracy Class RS485 Communication Port

By ELMEASURE

₹12,979 - ₹14,159

The Elmeasure High Profile 2 Relay Demand Controller with 1 Accuracy Class and RS485 communication port is engineered for precise monitoring and control of electrical loads in industrial and commercial environments. Featuring two configurable relay outputs, this controller allows operators to manage energy consumption effectively, reduce peak demand, and optimize power distribution. Its RS485 port supports Modbus protocol, enabling seamless integration with existing energy management systems and remote monitoring capabilities.
Designed for reliable performance, the 2 Relay Demand Controller provides real-time data logging, configurable alarm settings, and easy installation in panels and switchboards. Its accurate measurement and programmable functionality make it suitable for factories, commercial buildings, and energy-conscious facilities. By delivering detailed insights into electrical load patterns and facilitating automated control, the Elmeasure 2 Relay Demand Controller ensures operational efficiency, system stability, and improved energy management across diverse electrical networks.

Type of Product : Demand Controller

Accuracy Class : 1

Application : Industrial

Country of Origin : India

Type : High Profile 2 Relay

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

Communication Ports : RS485

Explore other Variants (2)

Ships within 60 days

Elmeasure Digital LED Load Manager EN8400LM(RS485)CL0.5

By ELMEASURE

₹7,315   ₹13,865

You save ₹6,550!

47.24% OFF

Bright 7 Segment 6 digit 4 row LED Display, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Optional futures: Demand Controller, Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter LED Load Manager EN8400LM

By ELMEASURE

₹5,899   ₹11,505

You save ₹5,606!

48.73% OFF

Bright 7 Segment 6 digit 4 row LED Display, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Optional futures: Demand Controller, Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure High Profile MFM Demand Monitor (LCD) RS485 Communication Port, PN8700P31

By ELMEASURE

₹15,339 - ₹18,879

You save ₹331!

1.72% OFF

The Elmeasure High Profile MFM Demand Monitor (LCD) PN8700P31 is designed for advanced monitoring of electrical parameters in industrial and commercial applications. Featuring a clear LCD display and an RS485 communication port, this multifunction demand monitor enables accurate measurement of voltage, current, power, energy, frequency, and power factor. The RS485 interface supports Modbus protocol, allowing seamless integration with centralized energy management and automation systems for real-time data acquisition and remote monitoring.
The PN8700P31 Demand Monitor offers precise demand tracking and load analysis to support effective power management and system stability. Its high-profile panel-mount design ensures easy installation and clear parameter visibility within switchboards and control panels. Built for reliable performance in demanding environments, this device assists operators in monitoring consumption trends, identifying irregularities, and maintaining efficient power distribution. Suitable for factories, commercial buildings, and utility panels, it delivers consistent measurement accuracy and comprehensive electrical insights.

Type of Product : Demand Monitor

Accuracy Class : 0.5S

Application : Industrial

Display Type : LCD

Type : High Profile MFM

Communication Ports : RS485

Harmonics : Industrial Harmonics 63rd

Explore other Variants (2)

Ships within 60 days

Elmeasure Digital Meter LCD Load Manager EN7700LM(RS485)

By ELMEASURE

₹6,843   ₹13,452

You save ₹6,609!

49.13% OFF

Bright LCD Display, 7 parameter display at a time, 7 digit energy, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Aperent Power, Active Energy, Reactive, Aperent Energy, Load Hrs, Old Energy, THD, KF, H/L, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Optional futures: Demand Controller, Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure High Profile MFM Demand Monitor (LCD) RS485 Communication Port, EN7500P

By ELMEASURE

₹9,911 - ₹17,699

You save ₹421!

2.67% OFF

The Elmeasure High Profile MFM Demand Monitor (LCD) EN7500P is engineered for accurate monitoring of electrical demand and multiple power parameters in industrial and commercial installations. Featuring a clear LCD display, this multifunction device enables simultaneous viewing of voltage, current, active and reactive power, energy consumption, frequency, and power factor. The integrated RS485 communication port supports Modbus protocol, allowing seamless connectivity with centralized energy management and automation systems for real-time data acquisition and remote monitoring.
The EN7500P Demand Monitor provides reliable demand tracking and detailed load analysis to support efficient power distribution and system stability. Its high-profile panel-mount design ensures easy installation and enhanced readability within switchboards and control panels. Built for dependable operation in demanding environments, this monitor delivers consistent measurement performance and comprehensive electrical insights, making it suitable for factories, commercial buildings, and utility panels requiring precise and continuous energy monitoring.

Type of Product : Demand Monitor

Application : Industrial

Display Type : LCD

Country of Origin : India

Type : High Profile MFM

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

Communication Ports : RS485

Harmonics : Industrial Harmonics 31st

Explore other Variants (3)

Ships within 60 days

Elmeasure High Profile MFM Demand Monitor (LED) 0.5S Accuracy Class Wi-Fi Communication Port, EN8400P33007

By ELMEASURE

₹15,250  

Elmeasure High Profile MFM Demand Monitor with Accuracy Class 0.5S and Wi-Fi Communication Port, EN8400P33007, offers precise demand measurement with wireless connectivity for modern energy management. Its Class 0.5S accuracy provides dependable load data for billing and demand analysis. The Wi-Fi interface supports remote monitoring, data logging, and control via internet-enabled devices, facilitating seamless integration with cloud platforms and supervisory systems.Built for durability and ease of use, this device features an intuitive interface and supports wireless data transfer. It allows facilities to monitor demand in real-time from anywhere, enhancing energy efficiency and reducing demand charges. The EN8400P33007 is ideal for modern buildings and industrial facilities looking to implement remote, wireless demand monitoring and control.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Generator Monitoring Unit GD3110

By ELMEASURE

₹2,713   ₹4,425

You save ₹1,712!

38.69% OFF

The Product has a dual display, It continuously displays kWh parameter along with user chosen Voltage or Amps or Hz. The Display is 6 na half digits non-resettable stepper counter and the voltage, current, and frequency display is a 4 digit LED with auto-scaling to a kilo. the meter is programmable for 3PH & Single phase applications, having one common CT and PT settings for all the monitoring values which can be made through front panel keys ensuring higher reliability. It has rich high frequency LED pulse output in the front fascia and an optional POP 12V at the rear which is best in the industry
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter LED Load Manager EN8400LM0.2RD

By ELMEASURE

₹11,209   ₹22,066

You save ₹10,857!

49.2% OFF

Bright 7 Segment 6 digit 4 row LED Display, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Optional futures: Demand Controller, Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc. Acc Class 0.2s + Individual Harmonics
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Intelligent Power Factor Controller IPFC-4CHANNEL

By ELMEASURE

₹4,601   ₹8,024

You save ₹3,423!

42.66% OFF

Intelligent Power factor controller, with three phase sensing, Intelligent power factor controlling based on the capacitor bank switching history ( Number of operations, On time) improves the capacitor lifetime. 6 or 8 or 12 switching relay outputs, automatic or manual control (manual control with power backup option). fully programmable, Fault detection Under over compensation, under/over current as well voltage (U Current over harmonics for voltage and current). Displays: VLL, VLN, Amps, ( Average and phases), Frequency, W, PF, VAR, ( Total and Phase wise) Kwh, PF Avg. RS485 Modbus Protocol Op.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter LED Load Manager EN8400LM4DOP

By ELMEASURE

₹8,141   ₹15,635

You save ₹7,494!

47.93% OFF

Bright 7 Segment 6 digit 4 row LED Display, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Optional futures: Demand Controller, Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc. with 4 Digital Output
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure High Profile MFM Demand Monitor (LED) Ethernet Communication Port, EN8400P-2007

By ELMEASURE

₹17,699 - ₹22,419

The Elmeasure High Profile MFM Demand Monitor (LED) EN8400P-2007 is a versatile energy monitoring device designed for industrial and commercial environments. Featuring an Ethernet communication port, this monitor allows seamless integration with energy management systems for real-time data acquisition and remote monitoring. Equipped with LED indicators, it provides clear feedback on electrical parameters including voltage, current, power, and energy consumption, enabling efficient load management and precise monitoring of energy usage.
The EN8400P-2007 Demand Monitor delivers reliable performance with high accuracy and robust industrial-grade construction. Its configurable settings, real-time data logging, and alarm functions help operators optimize energy usage, reduce peak demand, and maintain system stability. Ideal for factories, commercial buildings, and energy-conscious facilities, this monitor provides detailed insights into electrical loads, supporting effective energy management, improved operational efficiency, and proactive control of power distribution across complex electrical networks.

Type of Product : Demand Monitor

Application : Industrial

Display Type : LED

Country of Origin : India

Type : High Profile MFM

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

Communication Ports : Ethernet

Explore other Variants (3)

Ships within 60 days

Elmeasure High Profile 4 Relay Demand Controller (LED) RS485 Communication Port, EN8400P-1009

By ELMEASURE

₹23,599 - ₹25,959

The Elmeasure High Profile 4 Relay Demand Controller (LED) EN8400P-1009 is designed for advanced energy management in industrial and commercial applications. Featuring four configurable relay outputs and LED indicators, this controller allows precise monitoring and control of electrical loads. Its RS485 communication port ensures seamless integration with Modbus-compatible energy management systems, enabling real-time data acquisition, remote monitoring, and efficient load scheduling.
The Elmeasure High Profile 4 Relay Demand Controller (LED) EN8400P-1009 is designed for advanced energy management in industrial and commercial applications. Featuring four configurable relay outputs and LED indicators, this controller allows precise monitoring and control of electrical loads. Its RS485 communication port ensures seamless integration with Modbus-compatible energy management systems, enabling real-time data acquisition, remote monitoring, and efficient load scheduling. With Time of Day (TOD) functionality and programmable settings, the EN8400P-1009 Demand Controller helps operators reduce peak demand, optimize energy usage, and maintain system stability. The LED display provides clear operational feedback, while data logging and alarm capabilities enhance monitoring and fault detection. Compact and easy to install, this controller is ideal for factories, commercial buildings, and energy-conscious facilities seeking reliable, automated load management and detailed insights into electrical consumption patterns for improved operational efficiency.

Type of Product : Demand Controller

Application : Industrial

Display Type : LED

Country of Origin : India

Type : High Profile 4 Relay

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

Communication Ports : RS485

Explore other Variants (2)

Ships within 60 days

Elmeasure Digital Meter LED Demand Controller EN8410DMC(RS485)

By ELMEASURE

₹22,419   ₹37,524

You save ₹15,105!

40.25% OFF

Bright 7 Segment 6 digit 4 row LED Display, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, Demand Monitoring and Controller, RTC based 4 relay output, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Demand controller with 1, 2, 4 relays output options, Optional futures: Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital LED Demand Controller EN8410DMCRS485CL0.5

By ELMEASURE

₹24,779   ₹40,828

You save ₹16,049!

39.31% OFF

Bright 7 Segment 6 digit 4 row LED Display, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, Demand Monitoring and Controller, RTC based 4 relay output, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Demand controller with 1, 2, 4 relays output options, Optional futures: Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc. Acc Class 0.5
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure High Profile MFM Demand Monitor (LCD) 1 Accuracy Class RS485 + Ethernet Communication Port with TOD and 2DO + 2DI, PN8700P160TH

By ELMEASURE

₹29,499   ₹29,750

You save ₹251!

0.84% OFF

Elmeasure High Profile MFM Demand Monitor with Accuracy Class 1 and RS485 + Ethernet + USB Communication Port, PN8700P160TH, combines multiple communication interfaces for comprehensive demand monitoring and control. Its Class 1 accuracy ensures dependable load data, while the integrated RS485, Ethernet, and USB ports facilitate flexible connectivity to supervisory systems, cloud platforms, and local devices for remote data access, logging, and control.This versatile device is designed for rugged environments, featuring an intuitive interface and compact installation options. It supports real-time demand monitoring, data logging, and automation, helping facilities optimize energy usage, reduce demand charges, and enhance operational efficiency. The multiple communication options ensure compatibility with diverse systems, enabling seamless integration for comprehensive energy management solutions.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Earth Leakage Relay iELR CBCT IELRUPTO60DIA

By ELMEASURE

₹2,831   ₹4,602

You save ₹1,771!

38.48% OFF

7 Segment ultra Led display Intelligent Earth Leakage Relay, True RMS measurement, Continuous leakage current display (Programmable), Leakage current continuously displayed to enhance the user to understand the quality of electrical network/machine online, This can be disabled through setup if required, Wide input range 300mA to 12A and the trip time from 300ms to 30s, ( Optional 30mA to 1A) Manual test reset keys, optional RS485 Modbus protocol.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Intelligent Power Factor Controller IPFC6CHANNEL

By ELMEASURE

₹4,719   ₹8,496

You save ₹3,777!

44.46% OFF

Intelligent Power factor controller, with three phase sensing, Intelligent power factor controlling based on the capacitor bank switching history ( Number of operations, On time) improves the capacitor lifetime. 6 or 8 or 12 switching relay outputs, automatic or manual control (manual control with power backup option). fully programmable, Fault detection Under over compensation, under/over current as well voltage (U Current over harmonics for voltage and current). Displays: VLL, VLN, Amps, ( Average and phases), Frequency, W, PF, VAR, ( Total and Phase wise) Kwh, PF Avg. RS485 Modbus Protocol Op.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Automatic Current Changeover Limiter 3 Phase ACCL80A

By ELMEASURE

₹16,519   ₹22,125

You save ₹5,606!

25.34% OFF

The iACCL (Intelligent Automatic Changeover with Current limiter) is designed to automatically and seamlessly switch between sources of power. It is a smart programmable device that is compatible with ELNET and other energy management systems. It can be programmed to individually limit and allocate generator power to specific needs.
The iACCL allows supply from the main source as long as the load current is below the programmed limit. During a failure of the main supply, it automatically switches to the standby generator (DG)and restores supply to each consumer in sequence & starts monitoring its load. Whenever the load current exceeds the allotted limit, power is automatically switched off for 10 seconds and restored automatically. This cycle repeats 5 times for each event eventually doubling the duration to 20, 40, 80 & 160 seconds subsequently; it then enters into lockout mode until it is reset manually. It protects against unsafe low/high voltage and power interruptions during a changeover.
Features:
Microcontroller based automatic source changeover with neutral isolation.
SMPS based design for low power consumption.
Intelligent re-connection once a trip occurs, either due to overvoltage or overload.
Intelligent changeover with R phase or any one phase failure (Manufacturing option).
Manual reset provision when in sleep mode for restoring power supply.
Energy, Current, Voltage measurement for DG & Current measurement for EB.
Programmable threshold setting for both sources independently.
Over voltage protection for DG.
Start Time programmable for each unit to avoid loading the generator at a time.
Intelligent tripping: Inverse curve (Higher the overload faster the trip)
Potential free contact for connecting power load only in EB - Optional
Automatic trip if a sum of the power circuit and lighting circuit is >40A (single phase relay version) optional.
Individual phase overload monitoring (Any Phase > set current, it trips)
Patented alphanumeric display
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Automatic Current Changeover Limiter 3 Phase ACCL63A

By ELMEASURE

₹11,799   ₹17,700

You save ₹5,901!

33.34% OFF

The iACCL (Intelligent Automatic Changeover with Current limiter) is designed to automatically and seamlessly switch between sources of power. It is a smart programmable device that is compatible with ELNET and other energy management systems. It can be programmed to individually limit and allocate generator power to specific needs.
The iACCL allows supply from the main source as long as the load current is below the programmed limit. During a failure of the main supply, it automatically switches to the standby generator (DG)and restores supply to each consumer in sequence & starts monitoring its load. Whenever the load current exceeds the allotted limit, power is automatically switched off for 10 seconds and restored automatically. This cycle repeats 5 times for each event eventually doubling the duration to 20, 40, 80 & 160 seconds subsequently; it then enters into lockout mode until it is reset manually. It protects against unsafe low/high voltage and power interruptions during a changeover.
Features:
Microcontroller based automatic source changeover with neutral isolation.
SMPS based design for low power consumption.
Intelligent re-connection once a trip occurs, either due to overvoltage or overload.
Intelligent changeover with R phase or any one phase failure (Manufacturing option).
Manual reset provision when in sleep mode for restoring power supply.
Energy, Current, Voltage measurement for DG & Current measurement for EB.
Programmable threshold setting for both sources independently.
Over voltage protection for DG.
Start Time programmable for each unit to avoid loading the generator at a time.
Intelligent tripping: Inverse curve (Higher the overload faster the trip).
Potential free contact for connecting power load only in EB - Optional.
Automatic trip if a sum of the power circuit and lighting circuit is >40A (single phase relay version) optional.
Individual phase overload monitoring (Any Phase > set current, it trips).
Patented alphanumeric display.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter LCD Load Manager with RS485 PN7700LMRS485

By ELMEASURE

₹7,079   ₹13,452

You save ₹6,373!

47.38% OFF

Bright LCD Display, 7 parameter display at a time, 7 digit energy, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Aperent Power, Active Energy, Reactive, Aperent Energy, Load Hrs, Old Energy, THD, KF, H/L, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Optional futures: Demand Controller, Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Automatic Current Changeover Limiter 3 Phase ACCL40A

By ELMEASURE

₹6,843   ₹10,030

You save ₹3,187!

31.77% OFF

The iACCL (Intelligent Automatic Changeover with Current limiter) is designed to automatically and seamlessly switch between sources of power. It is a smart programmable device that is compatible with ELNET and other energy management systems. It can be programmed to individually limit and allocate generator power to specific needs.
The iACCL allows supply from the main source as long as the load current is below the programmed limit. During a failure of the main supply, it automatically switches to the standby generator (DG)and restores supply to each consumer in sequence & starts monitoring its load. Whenever the load current exceeds the allotted limit, power is automatically switched off for 10 seconds and restored automatically. This cycle repeats 5 times for each event eventually doubling the duration to 20, 40, 80 & 160 seconds subsequently; it then enters into lockout mode until it is reset manually. It protects against unsafe low/high voltage and power interruptions during a changeover.
Features:
Microcontroller based automatic source changeover with neutral isolation.
SMPS based design for low power consumption.
Intelligent re-connection once a trip occurs, either due to overvoltage or overload.
Intelligent changeover with R phase or any one phase failure (Manufacturing option).
Manual reset provision when in sleep mode for restoring power supply.
Energy, Current, Voltage measurement for DG & Current measurement for EB.
Programmable threshold setting for both sources independently.
Over voltage protection for DG.
Start Time programmable for each unit to avoid loading the generator at a time.
Intelligent tripping: Inverse curve (Higher the overload faster the trip).
Potential free contact for connecting power load only in EB - Optional.
Automatic trip if a sum of the power circuit and lighting circuit is >40A (single phase relay version) optional.
Individual phase overload monitoring (Any Phase > set current, it trips).
Patented alphanumeric display.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Intelligent Power Factor Controller IPFC12CHANNEL

By ELMEASURE

₹5,309   ₹9,794

You save ₹4,485!

45.79% OFF

Intelligent Power factor controller, with three phase sensing, Intelligent power factor controlling based on the capacitor bank switching history ( Number of operations, On time) improves the capacitor lifetime. 6 or 8 or 12 switching relay outputs, automatic or manual control (manual control with power backup option). fully programmable, Fault detection Under over compensation, under/over current as well voltage (U Current over harmonics for voltage and current). Displays: VLL, VLN, Amps, ( Average and phases), Frequency, W, PF, VAR, ( Total and Phase wise) Kwh, PF Avg. RS485 Modbus Protocol Op.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Automatic Current Changeover Limiter 3 Phase ACCL100A

By ELMEASURE

₹23,599   ₹29,500

You save ₹5,901!

20% OFF

The iACCL (Intelligent Automatic Changeover with Current limiter) is designed to automatically and seamlessly switch between sources of power. It is a smart programmable device that is compatible with ELNET and other energy management systems. It can be programmed to individually limit and allocate generator power to specific needs.
The iACCL allows supply from the main source as long as the load current is below the programmed limit. During a failure of the main supply, it automatically switches to the standby generator (DG)and restores supply to each consumer in sequence & starts monitoring its load. Whenever the load current exceeds the allotted limit, power is automatically switched off for 10 seconds and restored automatically. This cycle repeats 5 times for each event eventually doubling the duration to 20, 40, 80 & 160 seconds subsequently; it then enters into lockout mode until it is reset manually. It protects against unsafe low/high voltage and power interruptions during a changeover.
Features:
Microcontroller based automatic source changeover with neutral isolation
SMPS based design for low power consumption
Intelligent re-connection once a trip occurs, either due to overvoltage or over load
Intelligent changeover with R phase or any one phase failure (Manufacturing option)
Manual reset provision when in sleep mode for restoring power supply
Energy, Current, Voltage measurement for DG & Current measurement for EB
Programmable threshold setting for both sources independently
Over voltage protection for DG
Start Time programmable for each unit to avoid loading the generator at a time
Intelligent tripping: Inverse curve (Higher the overload faster the trip)
Potential free contact for connecting power load only in EB - Optional
Automatic trip if a sum of the power circuit and lighting circuit is >40A (single phase relay version) optional.
Individual phase overload monitoring (Any Phase > set current, it trips)
Patented alphanumeric display
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter LCD Demand Controller PN7710DMCRS485

By ELMEASURE

₹23,599   ₹38,822

You save ₹15,223!

39.21% OFF

Bright LCD Display, 7 parameter display at a time, 7 digit energy, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Aperent Power, Active Energy, Reactive, Aperent Energy, Load Hrs, Old Energy, THD, KF, H/L, Demand Monitoring and Controller, RTC based 4 relay output, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Demand controller with 1, 2, 4 relays output options, Optional futures: Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter LED Load Manager EN8400LMDS

By ELMEASURE

₹6,607   ₹12,685

You save ₹6,078!

47.91% OFF

Bright 7 Segment 6 digit 4 row LED Display, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Optional futures: Demand Controller, Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc. with Dual Source
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter LCD Demand Monitor EN7710DM(RS485)

By ELMEASURE

₹16,519   ₹27,848

You save ₹11,329!

40.68% OFF

Bright LCD Display, 7 parameter display at a time, 7 digit energy, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Aperent Power, Active Energy, Reactive, Aperent Energy, Load Hrs, Old Energy, THD, KF, H/L, Demand Monitoring, RTC based 4 relay output, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, options, Optional futures: Demand Controller, Demand controller with 1, 2, 4 relays output Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter LED Load Manager EN8400LM0.2

By ELMEASURE

₹10,029   ₹19,470

You save ₹9,441!

48.49% OFF

Bright 7 Segment 6 digit 4 row LED Display, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Optional futures: Demand Controller, Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc. Acc Class 0.2s
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter LED Demand Controller EN8410DM(RS485)

By ELMEASURE

₹16,519   ₹26,550

You save ₹10,031!

37.78% OFF

Bright 7 Segment 6 digit 4 row LED Display, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, Demand Monitoring, RTC based 4 relay output, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, options, Optional futures: Demand Controller, Demand controller with 1, 2, 4 relays output Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter LED Load Manager EN8400LM2AO

By ELMEASURE

₹7,551   ₹14,455

You save ₹6,904!

47.76% OFF

Bright 7 Segment 6 digit 4 row LED Display, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Optional futures: Demand Controller, Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc. with 2 Analog Output
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter LCD Demand Controller EN7710DMC(RS485)

By ELMEASURE

₹23,599   ₹38,822

You save ₹15,223!

39.21% OFF

Bright LCD Display, 7 parameter display at a time, 7 digit energy, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, Demand Monitoring and Controller, RTC based 4 relay output, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Demand controller with 1, 2, 4 relays output options, Optional futures: Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Intelligent Power Factor Controller IPFC8CHANNEL

By ELMEASURE

₹5,545   ₹10,384

You save ₹4,839!

46.6% OFF

Intelligent Power factor controller, with three phase sensing, Intelligent power factor controlling based on the capacitor bank switching history ( Number of operations, On time) improves the capacitor lifetime. 6 or 8 or 12 switching relay outputs, automatic or manual control (manual control with power backup option). fully programmable, Fault detection Under over compensation, under/over current as well voltage (U Current over harmonics for voltage and current). Displays: VLL, VLN, Amps, ( Average and phases), Frequency, W, PF, VAR, ( Total and Phase wise) Kwh, PF Avg. RS485 Modbus Protocol Op.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Intelligent Power Factor Controller IPFC8CHANNELRS485

By ELMEASURE

₹6,371   ₹12,154

You save ₹5,783!

47.58% OFF

Intelligent Power factor controller, with three phase sensing, Intelligent power factor controlling based on the capacitor bank switching history ( Number of operations, On time) improves the capacitor lifetime. 6 or 8 or 12 switching relay outputs, automatic or manual control (manual control with power backup option). fully programmable, Fault detection Under over compensation, under/over current as well voltage (U Current over harmonics for voltage and current). Displays: VLL, VLN, Amps, ( Average and phases), Frequency, W, PF, VAR, ( Total and Phase wise) Kwh, PF Avg. RS485 Modbus Protocol Op.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Intelligent Power Factor Controller IPFC6CHANNELRS485

By ELMEASURE

₹5,545   ₹10,266

You save ₹4,721!

45.99% OFF

Intelligent Power factor controller, with three phase sensing, Intelligent power factor controlling based on the capacitor bank switching history ( Number of operations, On time) improves the capacitor lifetime. 6 or 8 or 12 switching relay outputs, automatic or manual control (manual control with power backup option). fully programmable, Fault detection Under over compensation, under/over current as well voltage (U Current over harmonics for voltage and current). Displays: VLL, VLN, Amps, ( Average and phases), Frequency, W, PF, VAR, ( Total and Phase wise) Kwh, PF Avg. RS485 Modbus Protocol Op.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital Meter Intelligent Power Factor Controller IPFC4CHANNELRS485

By ELMEASURE

₹5,427   ₹9,794

You save ₹4,367!

44.59% OFF

Intelligent Power factor controller, with three phase sensing, Intelligent power factor controlling based on the capacitor bank switching history ( Number of operations, On time) improves the capacitor lifetime. 6 or 8 or 12 switching relay outputs, automatic or manual control (manual control with power backup option). fully programmable, Fault detection Under over compensation, under/over current as well voltage (U Current over harmonics for voltage and current). Displays: VLL, VLN, Amps, ( Average and phases), Frequency, W, PF, VAR, ( Total and Phase wise) Kwh, PF Avg. RS485 Modbus Protocol Op.
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure Digital LED Load Manager EN8400LMRS4854-20MA

By ELMEASURE

₹7,551   ₹14,455

You save ₹6,904!

47.76% OFF

Bright 7 Segment 6 digit 4 row LED Display, Displays: VLN, VLN, Amp, Hz, Angle V/A RPM, UB, Active, Reactive, Apparent Power, Active Energy, Reactive, Apparent Energy, Load Hrs, Old Energy, THD, KF, H/L, by default RS485 Modbus Protocol, % of unbalance V & A for all phase, Optional futures: Demand Controller, Individual Harmonics up to 31st level, 1/8MB data logger, Import / Export, 60/100A direct measurement, Digital Output/Analog Output, Ethernet / Zigbee Protocol for communication, TOD, Pulse Output, Dual source , Graphical view etc. with DO
Please Note: Product may differ (eg. colour) from the product Image displayed on website. Kindly check the technical specifications provided in description to make better purchase decision.

Add to Cart Buy Now

Ships within 60 days

Elmeasure High Profile MFM Demand Monitor (LED) 0.5S Accuracy Class, EN8400P3

By ELMEASURE

₹15,339 - ₹30,679

The Elmeasure High Profile MFM Demand Monitor (LED) EN8400P3 with 0.5S Accuracy Class is designed for high-precision energy monitoring in industrial and commercial power systems. Featuring a bright LED display, this multifunction demand monitor provides accurate measurement of voltage, current, active and reactive power, energy consumption, frequency, and power factor. The 0.5S accuracy class ensures enhanced measurement precision, making it suitable for applications requiring reliable and detailed electrical data analysis.
The EN8400P3 Demand Monitor supports comprehensive demand tracking and load monitoring to maintain efficient power distribution and system stability. Its high-profile panel-mount design allows easy installation in switchboards and control panels, while the robust construction ensures dependable performance in demanding environments. Ideal for factories, commercial facilities, and utility panels, this monitor delivers consistent accuracy and clear LED indication, enabling precise energy measurement and systematic load management across diverse electrical networks.

Type of Product : Demand Monitor

Accuracy Class : 0.5S

Application : Industrial

Display Type : LED

Country of Origin : India

Type : High Profile MFM

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

Explore other Variants (4)

Ships within 60 days

Elmeasure High Profile MFM Demand Monitor (LCD) 0.5S Accuracy Class RS485 Communication Port with Industrial Harmonics 31st, Real Time Clock, 2DO and Data Logger 512 KB, EN7500P31002

By ELMEASURE

₹21,239  

Elmeasure High Profile MFM Demand Monitor with Accuracy Class 0.5S and RS485 Communication Port, EN7500P31002, provides dependable demand data with moderate accuracy suitable for general energy management needs. Its Class 0.5S standard ensures reliable load measurement, while the RS485 interface supports remote data exchange, logging, and control over long distances, facilitating effective demand regulation.Designed for simplicity and durability, this demand monitor features an easy-to-navigate interface and a compact form factor for flexible installation. It enables real-time demand monitoring, data logging, and remote control, making it ideal for commercial and industrial environments focused on demand reduction, cost savings, and system stability. Its robust communication capabilities support proactive energy management strategies.

Add to Cart Buy Now

Ships within 60 days

Elmeasure High Profile 4 Relay Demand Controller RS485 Communication Port with TOD

By ELMEASURE

₹29,499 - ₹33,039

You save ₹391!

1.31% OFF

The Elmeasure High Profile 4 Relay Demand Controller with RS485 communication port and TOD (Time of Day) functionality is engineered for precise management of electrical loads in industrial and commercial setups. This controller allows operators to monitor energy consumption, control multiple relay outputs, and implement time-based load scheduling, ensuring efficient power distribution and optimized energy usage. Its high-profile design combines robust performance with easy integration into existing electrical systems through the RS485 communication interface.
Equipped with configurable relay outputs and TOD settings, the Elmeasure 4 Relay Demand Controller enables automated control of connected loads, reducing peak demand and improving system efficiency. The RS485 port supports Modbus communication, allowing seamless remote monitoring and data logging. Ideal for factories, commercial buildings, and energy management systems, this controller provides accurate load management, detailed operational insights, and reliable performance, helping facilities optimize energy consumption while maintaining system stability and operational reliability.

Type of Product : Demand Controller

Application : Industrial

Country of Origin : India

Type : High Profile 4 Relay

Name of Manufacturer/Packer/Importer : STARTEK INTERNATIONAL

Communication Ports : RS485

Slot Type : TOD

Explore other Variants (2)

Previous Next

Page 1 of 1 results